742998

Wolkenstein IF60-2FZW Manual

46
Zoom out
Zoom in
Previous page
1/59
Next page
46
2. Switch off the relevant cooking zone by setting the - sensor
to 0. Check that the indicator displays 0 and then H.
3. Switch off the appliance with the ON/OFF-sensor.
4. Beware of the hot surfaces of the cooking zones! An H
indicates which cooking zones are still hot. The H
disappears as soon as the relevant cooking zone has cooled
down. You can use the H for saving energy when starting a
new cooking procedure on a cooking zone which is still
warm/hot.
3.6 Flexible cooking zones
You can place the cookware on any place within the defining lines of the flex-
zones. When activating the bridge-function, the cookware must have a minimum
diameter of 210 mm for optimum result.
1. Touch the SELECTION OF COOKING ZONE-sensor of the
cooking zone which is intended for operating in flex-mode.
The indicator flashes.
2. Touch the SELECTION OF FLEX-ZONE-sensor. The indicator flashes and the flex-
mode is activated. The power level indicators of the front and back cooking
zone indicate the same power level.
3. Choose one of the two POWER CONTROL sensors to define the power level of
the flex-zone.
4. Adjust the power level using the +/- sensors (a), or slide (b), or touch a point
on the line (c).
… 46 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wolkenstein IF60-2FZW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wolkenstein IF60-2FZW in the language / languages: English, German as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info