517926
11
Zoom out
Zoom in
Previous page
1/106
Next page
11
G
Switching on / off
z Press the green button to switch on .
z Press the red button to switch off .
3 The machine has a circuit breaker to prevent switching
back on unintentionally after a power cut.
Overload protection
3 An overloading of the appliance (e.g. culminating in the
blocking of the cutting roller) can lead to the standstill
of the appliance after a few seconds. To protect the
motor from damage the appliance is automatically
disconnected from the mains by the overload
protection.
z Before putting into operation again wait for at least one
minute before immediately pressing the reset button
and then ON/OFF switch.
Toggle switch
3 The toggle switch enables freeing trapped material.
Position
The blade pulls in the crushed material.
Position
The blade rotates backwards and frees any trapped material.
1. Toggle switch to position .
2. Press green button
and do not release.
3 The toggle switch can only be used when the appliance
is switched off.
Special instructions for chopping
z Chop branches, twigs and wood shortly after cutting (this
chopped material will become very hard once it has dried out,
therefore the maximum diameter which can be processed is
less).
z Remove the side shoots on severely ramified branches.
z When processing garden or kitchen waste with a high water
content with a tendency to stick, crush alternately with wooden
chopping material to avoid blocking the appliance).
z Do not allow the chopping material in the area of the discharge
opening to accumulate too high. This can lead to material
which is already chopped blocking the discharge channel.
This can cause a kickback of the material through the filling
opening.
z Ensure that the maximum branch diameter for processing
permitted for your appliance is observed.
z The blade unit pulls in the chopping material largely by itself.
z Do not overload or block the motor in the case of tough
branches by frequently pulling back the branch.
B
C
A
E
D
D
B
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for WOLF-Garten SDL 2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten SDL 2500 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info