638677

WOLF-Garten Power Edition 46 B Manual

12
Zoom out
Zoom in
Previous page
1/42
Next page
12
G
z For safety reasons replace worn out or damaged parts.
z NOTE! Always have blades replaced or sharpened by a
WOLF-Garten Service Centre, as a blade balance test must
be performed in accordance with safety regulations and the
blade retaining bolt must be tightened to a specified torque.
z Wear suitable work gloves when carrying out the above work,
especially when handling the blade.
Assembly
Fixing of handle
1 ATTENTION! Take care that the switch cable does not
become caught and crused when folding the handle
frame.
1. Fold the handle bar toward the back .
2. Set the handle to the desired height and tighten the two wing
nuts
.
3. Fold the upper handle up and screw it tight with the two wing
nuts .
Mount grass catcher
z See illustrations.
Operation
Operating times
z Please check noise abatement regulations prevailing in your
country.
Starter cord assembly
1. Lift and hold operator presence bail arm (2).
2. Pull the starter rope slowly to the holding bracket.
3.
Twist the cord through the holder .
3 Always remove the starter cord from the holder before
folding the mower handles.
Oil Fill
1 Check oil level with mower standing on level ground.
Fill crankcase with quality oil SAE 30 up to the mark „Full“
on dipstick. (Do not overfill.) Capacity approx. 0,6 litre.
Screw in dipstick according to illus.
Filling with fuel
1 Caution! Rotating blades
Settings only to be carried out on the machine with the mo-
tor switched off and with the working tools at a standstill.
z Use only normal lead-free petrol (not Super unleaded).
z Avoid spilling petrol.
z Do not inhale the vapour.
Hang up collection bag
1 Attention! Rotary cutter blade
Undertake adjustments on the equipment only after the
motor is switched off and the cutting tool has come to a
standstill.
1. Lift the protective flap.
2. Hang the grass bag in the chassis with the hooks in the reces-
ses (see arrow).
3. Replace the protective flap.
Set cut height
1 Attention! Rotary cutter blade
Undertake work/adjustments on the equipment only after
the motor is switched off and the cutting tool has come to a
standstill.
1. Place hand into handle bar and depress button (1).
2. Lift or lower chassis until it engages into required position (2).
Selection of Cutting height
z If possible, mow when grass is dry in order to protect turf. Do
not se cutting position too low when mowing very hight or wet
grass.
z We recommend an average cutting height of 40-50 mm.
Start
z On a flat surface, if possible not in high grass.
1. Throttle lever (1) to “Betrieb” (= running).
2. Raise and hold the safety bracket (2).
3. Pull starter grip and return it slowly by hand.
Wheel drive (Power Edition 40 BA, Power Edition 46 BA)
z Wheel drive on: Raise drive bracket (3).
z Selecting the speed (Vario)
– Press button (4)
– Use the lever (5) to select the desired working speed (2.5
km/h - 5.0 km/h).
– Rabbit: faster. Snail: slower.
z Wheel drive off: Relapse drive bracket (3).
Stop Motor
z Release safety bracket (2).
3 If the motor does not start in cold weather, press the
primer.
A
B
A
A
B
C
D
E
F
G
H
J
K
L
M
H
H
J
H
H
H
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for WOLF-Garten Power Edition 46 B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten Power Edition 46 B in the language / languages: English, German, Dutch, French, Italian, Turkish as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info