799089
24
Zoom out
Zoom in
Previous page
1/177
Next page
Transport and storage
24
EN
Transport and storage
WARNING!
Risk of injuries due to the cutting tool.
¾Before transport or storage, switch o󰀨
the device and wait until the cutting tool
comes to a standstill.
¾Remove the power pack before transport
or storage.
Storage
ÎThoroughly clean your device at the end of each
season.
ÎAlways store the device in a dry and safe location
that is inaccessible to children.
ÎStore the power pack and hedge trimmer sepa-
rately.
ÎStore the power pack in a cool and dry location.
Recommended storage temperature 0 - 23°C.
ÎKeep the hedge trimmer and especially its plastic
components away from brake uids, petrol,
mineral oil containing products, penetrating oils
etc. They contain chemical substances that can
damage, attack or destroy the plastic components
of the hedge trimmer.
ÎFertilizers and other garden chemicals contain
substances that may have a highly corrosive
e󰀨ect on the metal parts of the hedge trimmer.
Therefore do not store your hedge trimmer in the
vicinity of these substances.
Troubleshooting
WARNING!
Risk of injuries or material damage
¾In case of doubt always take your mower to a specialist workshop.
¾Before any inspection or any work on the device, switch o󰀨 the motor and remove the power
pack.
Problem Possible cause Remedy
The device switch-
es
o󰀨.
The power pack is too hot. Allow the power pack to cool.
The power pack is discharged. Charge the power pack.
The temperature of the device (electronics) is too
high. Allow the device to cool and if necessary,
clean the ventilation slots
Overcurrent release If this occurs again take your device to a
specialist workshop.
The device will not
switch on.
switching the device
on
The power pack is discharged. Charge the power pack.
Overvoltage release If this occurs again take your device to a
specialist workshop.
Overcurrent release If this occurs again take your device to a
specialist workshop.
Power pack temperature too high or too low Allow the power pack to cool down or
warm up.
The power pack is defective. Replace the power pack.
The cutting blade
becomes hot. The cutting blade is blunt. Consult a specialist workshop.
There is a lot of friction because of a lack of
lubrication. Oil the cutting blade.
Uneven running,
severe vibration of
the hedge trimmer.
The cutting blade is damaged. Consult a specialist workshop.
The cutting blade fastening has come loose. Consult a specialist workshop.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for WOLF-Garten LYCOS 40-500 H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten LYCOS 40-500 H in the language / languages: All languages as an attachment in your email.

The manual is 17.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info