638488
11
Zoom out
Zoom in
Previous page
1/86
Next page
11
G
Connection to the plug socket (230 Volt, 50 Hz)
z Only connect the mower to plug sockets having a 16 Amp.
fuse (slow acting) (or LS Switch Type B).
3 Note: Residual current protection device
These protection devices protect against serious injury
when touching damaged wires, insulation faults and in cer-
tain cases also when damaging wires under potential.
z We recommend that the mower only be connected to
plug sockets which are protected by a residual current
protection device (RCD) having a residual current of no
more than 30 mA.
z There are retro-fitting sets for older installations. Consult
your specialist electrician.
Switching the mower on/off
z Switch the mower on when standing on level ground.
z Not in long grass– or tilt if necessary .
Motor on
1. Push button (1) and hold it down.
2. Pull the bracket (2).
3. Release the button (1).
Motor off
z Release the bracket (2).
Tips for mowing
z In order to prevent stripes on the lawn, always overlap the
tracks of the cut by a few centimetres .
z Always lay the cable securely on the terrace, paths or grass
which has already been cut.
Emptying of Grassbox
The grassbox is full and should be emptied as soon as grass clip-
pings remain uncollected on the ground behind your mower.
1 Attention! Rotary cutter blade
Undertake adjustments on the equipment only after the
motor is switched off and the cutting tool has come to a
standstill.
z Empty collection bag.
z Remove potential blockages in the cutting space before
starting.
Maintenance
General
1 Caution! Rotating cutters
Before all maintenance and cleaning tasks:
z Pull the mains plug out.
z Take care not to grab running cutters.
Cleaning
z Always clean the lawnmower after each use with a handbrush.
Simply stand it vertically on the collection basket.
z Never spray the mower with water.
Storage
z At the end of each mowing season, you should perform a
complete cleaning operation on the mower.
z The mower should be checked by a WOLF-Garten customer
service workshop in the autumn.
z Store the mower in a dry room.
Changing the cutters
z When performing any work on the cutters, coupling and cutter
beam, pull the plug out and wear protective gloves.
1 Caution!
After the cutters have been sharpened there could be imba-
lance.
z Always have the cutters sharpened by a specialist work-
shop, since a balance test in accordance with the safety
regulations must be carried out.
z Always have the cutters changed by a specialist workshop. A
19 mm torque wrench is an absolute must.
Torque for tightening the bolts: 13 - 19 Nm .
z Use only original WOLF-Garten spare parts.
L
K
K
M
N
N
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for WOLF-Garten Campus 32 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten Campus 32 E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Norwegian, Finnish as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info