Manual WOLF-Garten Campus 32 E (page 10 of 86) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Norwegian, Finnish)

638488

Zoom out

Zoom in

1/86

z Switch the mower off when tilting or transporting it, e.g. from/to

the lawn or over paths.

z Take care not to grab running cutters.

z Do not stand in front of the grass ejection opening.

z Before lifting or carrying the mower, switch the motor off and

wait until the cutting tools have come to a standstill.

z Never open the protective cover if the motor is still running.

z Before removing the grass collection device:Switch the motor

off and wait until the cutting tools come to a standstill.After

emptying, fix the grass collection device carefully.

z Never run the mower over gravel– Stones will fly up!

z If possible, do not mow if the grass is wet.

z Under the following conditions the mower must be switched

off, the mains plug must be removed and the mower must

be stationary:

– adjust the cutting height

– when leaving the mower

– when releasing blocked cutters

– in order to check the mower, to clean it and to work on it

– if foreign bodies are struck (check first whether the mower

or cutting tools have been damaged. Only then should you

remove the damage).

– if the mower is vibrating badly because of imbalance (switch

off and look for the cause).

– if the connection wire is damaged during use.

Maintenance

1 Caution! Rotating cutters

Before all maintenance and cleaning tasks:

z Pull the mains plug out.

z Take care not to grab running cutters.

z Check all the visible fixing bolts and nuts regularly for tight-

ness and retighten, particularly those of the cutter beam.

z Do not store the mower in damp rooms.

z For safety reasons, replace worn or damaged parts.

z Use only original WOLF-Garten spare parts, otherwise there is

no guarantee that your mower complies with the safety regulati-

ons.

Disposal

Assembly

Fixing the grab handle

1 Caution!

When collapsing and unfolding the grab handle, the cable

could be damaged.

z Take care that you do not kink the cable.

z See illustrations for assembly.

Fitting the collecting basket

1. Insert the projections of the collecting basket upper section

into the openings in the collecting basket lower section.

2. Push the collecting basket upper section evenly onto the coll-

ecting basket lower section.The collecting basket is securely

located as soon as it clicks in position.

Operation

Operating times

z Please observe the regional regulations.

z Request the operating times from your local authorities.

Insert the cable into the tension relief unit

z Please insert the cable into the tension relief unit in ac-

cordance with the illustrations

Fit the collecting basket

1 Caution! Rotating cutters

Settings only to be carried out on the mower with the motor

switched off and with the cutting tools at a standstill.

z Only insert the collection basket when your feet are at a

safe distance from the cutting tools.

1. Lift the protection cover.

2. Hang the collection basket in the notches in the chassis (see

arrow) using the hooks.

3. Apply the protection cover.

Setting the cutting height

1 Caution! Rotating cutters

Settings only to be carried out on the mower with the motor

switched off and with the cutting tools at a standstill.

z switch the motor off and pull the plug out from the mains.

z Unscrew the wheels and set to the correct height .

z The wheels must all be at the same cutting height setting!

Cutting height– Grass condition

z Mow when the lawn is dry if possible, to protect the turf. If the

lawn is wet and the grass is long, it may be better to mow with

a higher cutting height.

Electrical equipment must not be placed in the

household waste.The unit, accessories and pa-

cking material should be taken to an environment-

friendly recycling unit.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten Campus 32 E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Norwegian, Finnish as an attachment in your email.

The manual is 2,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

WOLF-Garten Campus 32 E Manual

Product: