638382

WOLF-Garten Campus 30 V Manual

11
Zoom out
Zoom in
Previous page
1/30
Next page
11
G
z If the connection cable is damaged during use it must be dis-
connected immediately. Do not touch the cable until it is dis-
connected.
z Switch off the lawnmower, pull the mains plug and wait for the
lawnmower to stop running if, for example:
– leaving the lawnmower
– unblocking a blade
– intending to check, clean or work on the lawnmower
– you have encountered a foreign object, in which case you
should check the lawnmower for damage and carry out any
necessary repairs.
– the lawnmower is vibrating heavily (switch off immediately
and ascertain the cause).
– you wish to change the settings or carry out cleaning work.
– you wish to check whether the connection cables have be-
come tangled or damaged.
– If the connection cable is damaged during use, it must be
immediately disconnected from the mains power supply.
Do not touch the cable before it has been disconnected
from the mains power supply.
Maintenance
1 Attention! Rotary cutter blade
Before all maintenance and cleaning work:
z Pull out the power plug.
z Do not touch running blades.
Disposal
Operation
Operating times
z Please check noise abatement regulations prevailing in your
country.
Feed cable through the strain relief
z Please feed cable through the strain relief.
Connecting to the mains (230 Volts, A.C., 50 Hz)
z The mower operates from any normal household mains sup-
ply, provided with a 16 Amps. fuse.
3 Note: Residual current protection device
These protection devices safeguard while touching
damaged wires, from insulation flaws and in certain cases,
also while damaging live wires.
z We recommend that the equipment only be plugged into
a power socket, which is protected by a residual current
protection device (RCD) with a residual current of not
more than 30 mA.
z Retrofit kits are available for old installations. Consult an elec-
trician.
Setting the working depth
1 Make sure the motor is switched off and the cutting
blades are not moving.
The working depth must be set correctly before the unit is usedfor
the first time. When assembling the wheels, ensure that they are
assembled in the eorreet positionfor the working depth setting.
Working depth setting when using the unit for the first time is po-
sition 1 of the wheel assembly.
3 Information:
Wear on the blades will make it necessary to re-adjust the
depth of cut at a later date. An optimum working depth is ob-
tained when the blades of the cutter are inserted 2-3 mm
into the ground. If the working depth is too deep, this can
overload the scarifier and cause damage. Ensure that the
depth of cut setting is correct.
z Unscrew wheels and move to the appropriate height setting.
Screw on wheels tightly.
Attach grassbox
Lift protective flap, hook grassbox with the hooks provided into the
holes in the chassis (see arrow), reattach protective flap.
Do not dispose of electrical equipment in domestic
waste. Recycle equipment, accessories and pa-
ckaging in an environment-friendly manner.
A
B
C
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for WOLF-Garten Campus 30 V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten Campus 30 V in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info