517912
13
Zoom out
Zoom in
Previous page
1/114
Next page
13
G
z Before examining or cleaning the tool or be-
fore removing the safety device or the cord
spool, switch off and disconnect the trimmer
from the mains. Only use original WOLF cord
spools and note the installation instructions!
z The cutting knife should not be cleaned under
running water or under high-pressure.
z Faults shall only be repaired by appointed ser-
vice centres or by the manufacturer.
z Make sure all air holes are free of dirt.
z Do not store the unit within reach of children.
Disposal
Operation
Operating times
z Please check noise abatement regulations
prevailing in your country.
Assembly
z See illustrations.
Insert power cable into cable holder
The power cable holder in the guide grip prevents
accidental disconnection of the extension cable
.
Connecting to the mains (230 Volts,
A.C., 50 Hz)
z The mower operates from any normal
household mains supply, provided with a 16
Amps. fuse.
3 Note: Residual current protection
device
These protection devices safeguard
while touching damaged wires, from
insulation flaws and in certain cases, also
while damaging live wires.
z We recommend that the equipment
only be plugged into a power socket,
which is protected by a residual
current protection device (RCD) with a
residual current of not more than
30 mA.
z Retrofit kits are available for old instal-
lations. Consult an electrician.
Working position
The optimal operational gradient for edging and
free-cutting is approx. 30°. For free cutting (no
ground contact) swing device in a semicircle be-
fore your body.
On / off switch
Thread adjustment
The thread is adjusted with the tilt switch. Briefly tilt
the running machine on a firm base, e. g. paving
slab (approx. 3 kg pressure). Approx. 1,5 cm cut-
ting thread are the automatically paid out..
3 Tips on trimming
z Cut high grass slowly, step by step.
z If the cutting cord becomes too short due
to normal wear, simply switch off the
trimmer. The cord will then automati-cal-
ly adjust to the correct length.
z Whenever the trimmer is switched off
and then on again, the cord automatical-
ly lengthens 6-8 mm. If the trimmer is fre-
quently switched on and off for no rea-
son, this will increase wear of the cord.
z You can prolong the life of your trimmer
by removing grass from the ventilation
slots and the bottom of the trimmer be-
fore or after each use.
Do not dispose of electrical equip-
ment in domestic waste. Recycle
equip-ment, accessories and packa-
ging in an environment-friendly man-
ner.
A
B
D
E
F
G
F
H
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for WOLF-Garten Campus 250 RT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten Campus 250 RT in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info