Manual WOLF-Garten Campus 250 RT (page 12 of 114) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

517912

Zoom out

Zoom in

1/114

z Use trimmer when the weather is dry and do

not leave it outside when it rains.

z Use a residual current device (RCD) rated for

a residual current not greater than 30 mA.

z Never install metal cutting elements.

Before operating

z Before starting the trimmer, clear all string,

wire etc. away from the area to be cut. Whilst

cutting look out for foreign objects.

z All cable must be inspected regularly for signs

of damage or ageing. Use only in perfect con-

dition!

z Tool must not be used when the safety device

or the covering is damaged.

z For safety reasons only original WOLF spare-

parts or parts appointed by the manufacturer

shall be used. Please note the installation ins-

tructions!

z Before adjusting or cleaning the tool and be-

fore checking for a caught or damaged con-

necting cable, switch off the tool and

disconnect the mains plug.

z Before starting the unit, and after any impacts,

examine the unit for signs of wear or damage.

Have any detected damage repaired immedia-

tely.

Cable

z Use only extension cables with a minimum

cross-section of 3x1.5mm

and a length of

max. 25 m:

– When using rubber-sheathed cables, they

must be of typeHO7RN-F or heavier.

– When using PVC-sheathed cables, they

must be of type HO5 VV-F or heavier

(cables of this type are not suitable for con-

tinuous outdoor use - e.g. underground in-

stallation for the connection of an outdoor

socket or pond pump, or outdoor storage).

z They must be waterproofmobile decvices that

are used outdoors must be connected via a re-

sidual current circuit breaker.

z Use a leakage-protective system (RCD) with a

leakage current of no more than 30 mA.

z Attach connection cable to traction relief.

Make sure that in does not rub against edges,

pointed or sharp objects. Do not squeeze ca-

ble through door or window gaps.

z Switching devices must not be removed or

bridged (e.g. tying of switching lever to guide

spar).

Working

z Always keep hands and feet well clear of the

cutting mechanism, particularly when starting

the unit.

z Avoid injury from each of the components

which serve to cut the line length. After pulling

out a new length of line, always hold the unit in

its normal operating position before starting it.

z When starting the trimmer hold its base paral-

lel to the lawn area in order to avoid accidents.

z Keep your hands away from the moving cord.

z Wear eye protection!

z Always wear appropriate working clothes and

sound footwear when using the trimmer.

z Before carrying the trimmer to the next lawn

area to be cut, switch it off.

z Be careful when you go backwards. You may

stumble!

z Keep the cable away from the cutting tool.

z Should the powercord be damaged during

use, immediately disconnect it from the mains.

Do not touch the cable until it has been discon-

nected from the mains.

z Never leave the trimmer without supervision.

Store it in a safe place.

z The switches installed shall not be removed or

bridged over, e. g. by binding the switch to the

handle.

z Do not allow the cord spool to strike the ground

or edges of working area. If the cord spool re-

ceives a hard knock, this will cause a strong vi-

bration on the handle. If this occurs, the

trimmer should be checked by a qualified ser-

vice centre.

After operating

z After using the unit, disconnected the power

cord from the wall outlet and inspect the unit

for damage.

z When switching off the trimmer: Attention: the

cutting tool does not stop immediately!

z Always wait for the cutting tool is stop.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten Campus 250 RT in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

WOLF-Garten Campus 250 RT Manual

Product: