Manual WOLF-Garten A 4600A (page 13 of 312) (All languages)

799078

Zoom out

Zoom in

1/312

Operating Instruction – Lawnmower with IC engine English

Information for units

corresponding with Fig. 6C

The unit can be switched on/off

with the left or the right lever or

even with both levers together.

Note

When the unit is pulled back, there

may be increased resistance on the

back wheels on account of the

design. This is not a fault with the

appliance but occurs for technical

reasons.

Remedy (depending on model):

Without pulling the drive handle,

push appliance forwards a little,

then backwards.

Changing drive speed of the

wheel drive

(depending on model)

Caution

Damage to the lawn mower

Make adjustments when the engine

is running only.

Model 6D, E

Select from the different speeds

using the small lever (1/min./

and 4/max./ ).

Fig. 6F, G

Select from the different speeds

using the lever (1/min./ and

4/max./ ).

Note

For technical reasons the speed

may be difficult to change when the

appliance is at a standstill.

Remedy: Pull drive bar and select

speed setting.

Detaching and emptying the

grass sack

(for appliances with grass catchers)

Fig. 11

If cut grass is left lying on the

ground or if the level indicator

(optional, Fig. 12) indicates that the

basket is full:

Release safety hoop and wait

until the engine stops.

Lift the deflector flap and unhook

the grass sack.

Empty out the contents.

Working without the grass sack

Whenever you detach the grass

sack, the deflector flap drops down.

When working without a grass

catcher, the mowed grass is

ejected directly downwards.

Retrofitting for mulching

(for appliances with optional

mulcher)

Appliances with rear discharge:

Fig. 8A

Lift the ejection flap.

Remove the grass catcher.

Insert mulch key

(depending on model).

Lower the ejection flap.

Note

Models with integrated mulching

function do not require a separate

mulch key – a specially shaped rear

flap assumes this function (fig. 8B).

Appliances with side discharge:

Fig. 9

Attach impact protection/mulch

lock instead of the side discharge

(Fig. 9A)

Remove side discharge – impact

protection/mulch lock closes

automatically (Fig. 9B).

Changing appliances over to

side discharge

(depending on model)

If fitted:

Remove grass catcher and lower

the rear discharge flap.

Lift impact protection/mulch lock

and attach side discharge

(Fig.

9C).

After finishing work

Remove the ignition key (if used).

Wait until all moving parts have

come to a complete stop and

the engine has cooled down.

Turn off the fuel tap (if fitted – see

engine manual).

Disconnect the spark plug

terminal on the engine.

Empty grass catcher.

For appliances with electric starter:

Recharge accumulator for

10 hours.

Note

Leave engine to cool down before

placing the mower in an enclosed

space.

Tips on lawn care

Here are some tips to help you

keep your lawn looking healthy and

ensure uniform growth.

Mowing

A lawn is made up of various

different types of grass. If you mow

your lawn frequently, those types of

grass which form strong roots and

a firm turf surface will grow better.

If you only rarely cut the grass, you

will encourage the development of

high-growing types of grass and

other weeds, such as clover and

daisies.

The normal height of a lawn is

approx. 4–5 cm. Only 1/3 of the

total height should be mown;

therefore cut 7–8 cm long grass to

normal height.

Preferably do not cut the lawn

shorter than 4 cm, otherwise the

turf will be damaged in a dry period.

If the grass has grown particularly

high (e.g. during a holiday period),

cut it back to its normal height in

stages.

When mowing, always overlap the

mown swaths slightly.

Mulching (using the

accessories)

During mowing the grass is cut into

small pieces (approx. 1 cm) and is

left on the ground. A lot of the

nutrients in the cut grass are

retained for the benefit of the lawn.

For the best possible result the

grass must always be kept short,

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten A 4600A in the language / languages: All languages as an attachment in your email.

The manual is 17.9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

WOLF-Garten A 4600A Manual

Product: