Manual WOLF-Garten A 4600A (page 12 of 312) (All languages)

799078

Zoom out

Zoom in

1/312

English Operating Instruction – Lawnmower with IC engine

Fig. 3

Set the cutting height of the grass

as required.

Setting option (depending on

model) from approx. 3

cm to

maximum 9

cm.

Note

If appliances have individual wheel

adjustment, set all wheels to the

same height.

Model A

Attach the wheels in the position

required.

Model B

Pull the flap and snap into place

in the position required.

Model C



Advance or push back the lever of

the central vertical adjustment and

snap into place in the position

required.

Locking front wheels

(only appliances with lockable front

wheels)

Fig. 4

Lock wheels to drive straight ahead

– set the wheels in forward position

and put hoop into large hole.

Wheels are freely movable – put

clamp into large hole.

Fill up with fuel and check the

oil level

Fill up with lead-free petrol (see

engine manual).

Fill fuel tank up to max. 2 cm

below the lower edge of the inlet

nozzle.

Close fuel tank tightly.

Check oil level and, if required,

top up (see Engine manual).

Starting the engine

Fig. 5

Danger

To prevent injury:

– Do not start the engine when you

are standing in front of the

ejector;

– Keep hands and feet well away

from the cutting blade;

– never place your hands, feet, or

other parts of the body near

rotating parts; Always keep away

from the ejector.

Before starting the engine,

disengage the clutches for all

cutters and drives.

Do not tip the appliance when

starting. Keep the appliance on an

even surface with little or the

shortest possible grass.

Information about the engine

Observe the information in the

engine manual.

– Some models have no throttle

and the speed is adjusted

automatically. The engine

always runs at optimum speed.

– Even if the engine is warm, it may

be necessary to actuate the

choke or the primer.

– Some models have no choke and

no primer. The engine is

automatically set to the particular

starting process.

If the engine is cold:

Open the fuel tap (if fitted).

Units with choke :

Set the choke lever to , or pull

out the choke and set the

accelerator lever (if fitted) to

/max. (Fig. 5A)

Set the accelerator lever to -

fig. 5A.

Appliances with primer:

Press primer forcefully 1–5x and

move throttle (if fitted) to

/max. – fig. 5B.

If the engine is warm:

Open the fuel tap (if fitted).

Set throttle (if available) to

/max. – Fig. 5B

Appliances without electric starter:

Fig. 5C

Stand behind appliance – Press

and hold safety lever.

Slowly pull the starter cable grip

until you feel resistance, and

then pull quickly and strongly. Do

not let the pull-starter handle

spring back, but slowly guide it

back.

For appliances with electric starter:

Fig. 5D

Disconnect charger from power

supply and unit.

Stand behind appliance – Press

and hold safety lever.

Turn ignition key on the steering

handle until the engine starts

(start attempt max. 5 seconds,

wait 60 seconds before the next

attempt).

Note:

If appliances feature electric

starter, the engine (depending on

model) can also be started

manually with the pull-starter

handle.

When the engine is running:

After starting the engine

(depending on the model):

– return the choke (if fitted),

– move the accelerator lever (if

fitted) between /max and

/min so that the engine can

warm up briefly.

Set the throttle to full throttle (if

available).

Note

If you need more information about

operating the engine, please refer

to the engine manual.

Stopping the engine

Fig. 7

Bring throttle (if available) into

position /min.

Release the safety hoop. The

engine and the cutting tool stop

after a short time.

Working with the snow-

clearing machine

Engaging/disengaging gear

drive

(only in the case of appliances with

gear drives)

Fig. 6A, B, C

Wheel drive activation

/ :

Pull and hold the lever/hoop.

Wheel drive deactivation

/ :

Release lever/hoop.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of WOLF-Garten A 4600A in the language / languages: All languages as an attachment in your email.

The manual is 17.9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

WOLF-Garten A 4600A Manual

Product: