813089
18
Zoom out
Zoom in
Previous page
1/83
Next page
Bedienungsanleitung Steuerung S4_2006_09_25-neu.doc Page 18 / 83
© wodtke GmbH Tübingen. All rights reserved. Subject to change without notice. Month of issue xx/2007 Art. No. 950 281
the appliance is switched off. Automatic operation is not possible from this
state. To switch the appliance on press the I/O key.
Important Note:
The I/O key overrides all other functions and is available in any operating
state (an “emergency ON” switch so to speak).
The I/O key interrupts any preceding operating state by switching the appliance “OFF“ or
“ON”. If the appliance has been switched off with this key you can only switch it on again by
pressing the I/O key again. Note: In this state, i.e. when the “stand-by dot” is displayed the
appliance will not react to signals from an external or internal controller! External or
internal controllers will identify the appliance as “not ready” in this state, even if it readily starts
up when you press the I/O key. The desired thermal output can be adjusted at any time via +/-,
even when the appliance is off. The “Menu” remains accessible when the appliance is switched
off.
5.8.1 Switching the appliance on via the I/O key
Pressing the I/O key switches on the device.
After this the display briefly shows “ON” and then, for a few seconds,
the programme version installed, for ex.
“P3 400”. During these seconds the system checks whether all
functions are o.k. In the event of an error the appliance does not start
and instead display the relevant error message (see Chapter 0 ff.). If
everything is in order the appliance then enters preheating
programme “Aand eventually heating programme “H”.
5.8.2 Switching the appliance off via the I/O key
Pressing the I/O key switches on the device. and the message “OFF”
will briefly appear in the display.
After “OFF” has been displayed the appliance enters the fan after-run
phase (“G OFF”) and finally goes into stand-by “stand-by dot”).
5.8.3 Reset via the I/O key
The I/O key also allows you to restart the appliance after a class 1 error has occurred. The only
way to restart the appliance after a class 1 error has occurred during operation is to press the
I/O key. See Chapter 0 on this.
wodtke
ON P3 A
400 - 15
This appears for a few
seconds (functional
check).
G .
OFF
OFF
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wodtke Frank SX waterplus S4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wodtke Frank SX waterplus S4 in the language / languages: German as an attachment in your email.

The manual is 3.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wodtke Frank SX waterplus S4

Wodtke Frank SX waterplus S4 User Manual - German - 76 pages

Wodtke Frank SX waterplus S4 User Manual - French - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info