813089
14
Zoom out
Zoom in
Previous page
1/83
Next page
Bedienungsanleitung Steuerung S4_2006_09_25-neu.doc Page 14 / 83
© wodtke GmbH Tübingen. All rights reserved. Subject to change without notice. Month of issue xx/2007 Art. No. 950 281
5.2 Manual selection of thermal output
The desired thermal output of the appliance can be adjusted at any time using the +/- keys. The
selected value stays valid even after switching off the appliance and remains so until a new
value is entered manually. After completing the preheating programme the appliance enters the
heating programme, where it automatically delivers the selected thermal output so long as
this setting is not overridden by an internal or external controller (see modulation). The
selected thermal output is displayed in kW and can be adjusted in steps of 0.5 kW.
Tip:
In buildings with rooms temperatures below +10 °C (for ex. holiday flats, new
buildings) we recommend setting thermal output to at least 4.0 kW.
5.3 Initial operation
Important information:
In Germany the appliance must be inspected by the district master chimneysweep before its
initial operation. The master chimneysweep is responsible for issuing an operating licence.
Always keep the firedoor closed, even when the appliance is cold.
Never light the appliance with flammable or readily ignitable liquids.
The door with the ceramic glass window becomes very hot during operation. Make sure that
nobody touches the window.
The panels may also become hot after prolonged operation. Use the heat protection gloves
delivered with the appliance.
Do not let children or adolescents come near the appliance unsupervised!
All steel and cast metal parts of the stove have been coated and baked with a highly heat-
resistant enamel at the factory. During the stove’s initial operation the enamel will undergo
an afterdrying process. This can give rise to odour and fumes! In this case please observe
the following:
o Keep everyone including pets out of the room during this process, since the emitted
fumes may be harmful to health!
o Air the room thoroughly to allow the fumes to escape.
o During the afterdrying process the enamel will still be a little soft. Avoid touching
enamelled surfaces to make sure they don’t get spoilt.
o Let the appliance run for some time at a high level to allow the enamel to harden
completely.
Complete the installation procedure as described in the assembly instructions before filling
pellets into the fuel hopper. Fill the hopper with at least 5 kg of wood pellets.
Make sure that no objects have been left in the firebox or burner pot.
* This dot also lights up to indicate stand-by mode
Feed screw indicator flashes or lights up while feed screw is running*
“H” indicates that heating programme is running
Display of selected thermal output = 4.0 kW
4.0
H .
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wodtke Frank SX waterplus S4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wodtke Frank SX waterplus S4 in the language / languages: German as an attachment in your email.

The manual is 3.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wodtke Frank SX waterplus S4

Wodtke Frank SX waterplus S4 User Manual - German - 76 pages

Wodtke Frank SX waterplus S4 User Manual - French - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info