813100
16
Zoom out
Zoom in
Previous page
1/64
Next page
© wodtke GmbH - Tübingen. IR_BA_190726 Page 16 / 64
Installation • Safety
Installation
7. Safety
Only a qualied contractor should carry out installation, com-
missioning, maintenance and repair of the appliance.
7.1 General safety instructions
- We guarantee trouble-free function and operational relia-
bility only if original accessories and spare parts intended
for the appliance are used.
- Fit the appliance to a vertical wall that is temperature-re-
sistant to at least 90°C.
- Observe the minimum clearances to adjacent object
surfaces (for minimum clearances see chapter "Specica-
tions/ Minimum clearances").
- Never install the appliance directly below a wall socket.
- Select your installation location so that no sockets are in-
stalled on the surface concealed by the appliance.
- When installing the heating appliance in rooms with a
bath and/or shower, observe the safety zone according to
VDE0100,part701, in accordance with the details on the
appliance type plate. The mains junction box must not be
installed in safety zone1 or 2 in this instance.
- Install the appliance in such a way that switching and con-
trol equipment cannot be touched by a person in the bath
or shower.
- Design all materials in accordance with the rated con-
sumption of the appliances.
- When selecting an installation site; ensure that no persons
or objects can come to harm if the toughened safety glass
spontaneously breaks.
7.2 Instructions, standards and regulations
Note
Observe all applicable national and regional regula-
tions and instructions.
7.3 EU conformity and Ecodesign Directive
As of 01/01/2018, the EU conformity of these appliances is ad-
ditionally dependent on compliance with ecodesign require-
ments.
These appliances may only be installed and commissioned in
conjunction with external room temperature controllers that
have the following functions:
- Electronic room temperature control and day of week
control
- Adaptive control of the start of heating
Suitable controllers can be found in our pricelist.
Failure to observe these requirements will result in the loss of
the CE designation.
8. Appliance description
8.1 Standard delivery
The following are delivered with the appliance:
- 1 retaining bracket
- IR...300-500: 1 wall mounting bracket
- IR...700-900: 2 wall mounting brackets
8.2 Required accessories
Only use the appliance in conjunction with the room tempera-
ture controllers listed in chapter "EU conformity and Ecodesign
Directive".
9. Installation
9.1 Installation site
! Material losses
Observe the minimum clearances (see chapter "Spec-
ication/ Minimum clearances").
! Material losses
The appliance is not suitable for mounting on ceilings
or inclines.
- The appliance is exclusively designed for installation on a
solid wall.
- Ensure the wall oers adequate load bearing capacity.
- The appliance can be mounted in any room. You may only
mount the appliance within protection zone 2 or higher in
bathrooms.
9.2 Wall mounting
Note
You can mount the appliance both vertically and hori-
zontally.
The ON/OFF switch position can be used to correctly
align the appliance:
- When mounted vertically, the ON/OFF switch is lo-
cated on the bottom edge of the appliance.
- When mounted horizontally, the ON/OFF switch
is located on the left outer edge of the appliance
when viewed from the front.
9.2.1 Wall mounting bracket
IR...300 | IR...500: The appliance comes with a wall
mounting bracket.
- The wall mounting bracket is used to mount the appliance
vertically or horizontally.
IR...700 | IR...900: The appliance comes with two wall
mounting brackets of dierent lengths.
- The short wall mounting bracket is used to mount the ap-
pliance vertically.
- The long wall mounting bracket is used to mount the ap-
pliance horizontally.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wodtke Feel Warm IR300- IR500 - IR700 - IR900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wodtke Feel Warm IR300- IR500 - IR700 - IR900 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 9.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info