813148
37
Zoom out
Zoom in
Previous page
1/68
Next page
Manual_S5_Airplus_2015_04_20 Page 37 / 68
© Wodtke GmbH - Tübingen. All Rights and Changes Reserved.Printed 04/2015 Part No. 950 976
15 Cleaning
In contrast to oil or gas, ash and soot are always
created when burning solid fuels. As a result, reg-
ular cleaning by the operator is required for oper-
ation without malfunctions.
Attention / Danger:
Units which are not cleaned according to our
specifications may not be operated. All war-
ranty claims are void in case of non-compli-
ance.
The number of cleanings of the burner pot /
cast grate is dependent on the ash content of
the pellets and cannot be changed by settings
on the unit, because the ash is a non-combus-
tible component of the pellets and therefore
cannot be influenced by the combustion pa-
rameters!
We therefore recommend using only wood pel-
lets with an ash content of < 0.7%.
Solid fuels create a window coating on the view-
ing window, particularly in the case of the very
fine ash of wood pellets, which can appear as
very light or dark black (especially at low output),
depending on the pellet quality and output set-
tings of the unit. This is a natural process during
the combustion of wood pellets and is not a de-
fect.
Caution!
Before beginning cleaning / maintenance
work, shut down the furnace and allow it to
cool. Please also observe the safety instruc-
tions under the container cover. All compo-
nents in the combustion chamber may still be
hot. Embers may be concealed in the ash.
Never put unburned pellets or ash from the
combustion chamber back into the storage
container risk of fire!
Fig. 63: front view, family.nrg
The ash drawer must be emptied no later than
when the ash is up to to the top edge of the ash
drawer.
Do not open the combustion chamber door
during operation if possible; if necessary,
open it only briefly (< 1 minute). Viewing window
and combustion chamber door may be hot risk
of injury. Before opening, allow the furnace to cool
sufficiently. Use heat resistant glove.
Our tip: place newspapers or the like in front of
the furnace before opening the doors, so that the
flue ash that falls from the doors lands on top of
them.
Combustion cham-
ber door contact
switch
(FT OPEN)
Latch key for con-
tact switch (adjusta-
ble)
Ash drawer
Cast grate (can be
pulled out)
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wodtke Easy.nrg S5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wodtke Easy.nrg S5 in the language / languages: English as an attachment in your email.

The manual is 6.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wodtke Easy.nrg S5

Wodtke Easy.nrg S5 User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info