813148
34
Zoom out
Zoom in
Previous page
1/68
Next page
Manual_S5_Airplus_2015_04_20 Page 34 / 68
© Wodtke GmbH - Tübingen. All Rights and Changes Reserved.Printed 04/2015 Part No. 950 976
13 Initial Commissioning
Once the furnace has been properly installed, con-
nected and accepted by the authorised district
chimney sweep or the responsible local author-
ity, as well as filled with pellets, initial commission-
ing can be carried out.
You must first be instructed by your designated
specialised dealer, as well as study the enclosed
instructions.
Be absolutely sure that there are no more acces-
sories in the ash drawer, as they can melt / burn
and damage the furnace.
The following accessory parts are part of the
scope of supply of the furnace and must be re-
moved before commissioning:
Combustion chamber (Fig. 61):
Glass cleaner
Instructions
Quick-start instructions
Cleaning brush
Rear wall:
Cleaning brush
Snake design handle (for opening the
combustion chamber door)
Fig. 61: accessories in the combustion chamber
13.1 Important Notices
Before commissioning in Germany, the
heating system must be accepted by the
authorised district chimney sweep. This
authority issues the operating permit.
Always keep combustion chamber door
closed, even when in a cold state.
Never use combustible or highly flammable liq-
uids for igniting.
The door with the ceramic glass pane be-
comes very hot during operation. Take care
not to touch the pane.
The panelling can also become hot during con-
tinuous operation. Use the supplied heat-re-
sistant glove.
Do not leave children or young people near the
furnace unattended!
All steel and cast parts of the furnace have
been coated in the factory with highly heat-re-
sistant paint and fired. When heating up the
new furnace for the first time, the paint under-
goes a final drying process, which can create
odour and smoke! Please observe the follow-
ing suggestions:
o No people or pets should remain in the
room during this process, as the va-
pours emitted can be hazardous to
health!
o Ventilate the room well so that the va-
pours that are released can be re-
moved.
o During the curing period, the paint is
still soft. Do not touch painted surfaces
in order to prevent damage to the paint
surface.
o The paint finishes curing after operat-
ing for a while at high heating output.
Attention:
the furnace may never be operated
without the cast grate!
the cast grate may not be removed /
pulled during operation of the furnace!
Do not insert cast grate skewed (door will not
close)
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wodtke Easy.nrg S5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wodtke Easy.nrg S5 in the language / languages: English as an attachment in your email.

The manual is 6.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wodtke Easy.nrg S5

Wodtke Easy.nrg S5 User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info