813148
25
Zoom out
Zoom in
Previous page
1/68
Next page
Manual_S5_Airplus_2015_04_20 Page 25 / 68
© Wodtke GmbH - Tübingen. All Rights and Changes Reserved.Printed 04/2015 Part No. 950 976
8.4 Main Board Outputs
Overview of outputs / general notices:
The status of these outputs Reserve 1 Reserve
4 can be queried via the menu level 1 on the dis-
play. See Chapter .
Fig. 45: main board outputs
8.4.1 "Sensor FKY" Output (Inactive)
Inactive / cannot be used
Fig. 46: sensor FKY output
8.4.2 "Pump" Output (Inactive)
Inactive / cannot be used
Fig. 47: pump output
8.4.3 "Reserve 1" Output (Operating
message)
3-pole relay output (normally open) with mains
voltage / 230 V AC (unregulated): for connection
of external devices which require a signal with
mains voltage during operation of the furnace (e.g.
wodtke flue gas damper AK1).
Fig. 48: Reserve 1 output
Output R1 ON = 230 V / mains voltage =
furnace in operation Note: G OFF applies
as operation.
Output R1 OFF = 0 V = furnace off or fur-
nace not ready (e.g. voltage failure, fur-
nace shut down via button or furnace
shut down via external / internal control-
ler).
8.4.4 "Reserve 2" Output (Collective
fault message)
3-pole relay output (normally open) with mains
voltage / 230 V AC (unregulated): for connection
of external devices which require a signal with
mains voltage in case of furnace fault.
Fig. 49: Reserve 2 output
Output R2 ON = 230 V / mains voltage =
fault-free operation
Output R2 OFF = 0 V = fault, voltage fail-
ure or unit shut down via button.
8.4.5 "Reserve 3" Output (Fault Mes-
sage, Pellet Chute Temperature TP)
3-pole triac output (normally open) with mains volt-
age / 230 V AC (unregulated): for connection of
external devices which require a signal with mains
voltage in case of temperature too high in the pel-
let chute (e.g. visual or acoustic warning signal,
bell, etc.).
Fig. 50: Reserve 3 output
Output R3 ON = 230 V / mains voltage =
TP temperature too high
Output R3 OFF = 0 V = TP temperature
OK
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wodtke Easy.nrg S5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wodtke Easy.nrg S5 in the language / languages: English as an attachment in your email.

The manual is 6.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wodtke Easy.nrg S5

Wodtke Easy.nrg S5 User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info