813056
51
Zoom out
Zoom in
Previous page
1/68
Next page
Manual_S5_Airplus_2015_04_20 Page 51 / 68
© Wodtke GmbH - Tübingen. All Rights and Changes Reserved.Printed 04/2015 Part No. 950 976
Wodtke
17 Menu Level / Unit Data Query
The unit values can be queried by pressing the "Menu" button. Whenever you go to the
menu level, the display of the installed software (e.g. S5 002), shown adjacent, first
appears. The other menu displays can be reached with the +/- buttons.
To leave the menu level for the operating level, press the "Menu" button again. The
system automatically returns to the menu level if no button is pressed for longer than
60 seconds.
Notice: Whenever indicator codes from the following table appear in the display,
you are in the menu level. It is not possible to control the unit from here (excep-
tions: "ON/OFF" via the I/O button, as well as maintenance reset in the PW menu
item).
Display indi-
cator
Meaning
Remarks
S5
001, 002...
Currently installed software version
Displays the basic software installed on the board (like a
computer operating system). This is not the program ver-
sion which determines the furnace output.
Z
ON / OFF
Z ON = ignition on
Z OFF = ignition off
Indicates whether the "Ignition Z" output has voltage (ON)
or not (OFF).
S
...
Screw cycle in seconds
Indicates the current activation duration of the pellet screw
conveyor in seconds = pellet through-put default value
U
...
Exhaust fan revolution in %
Indicates the % of nominal voltage currently applied to the
"fan" output.
L
...
Airflow on air volume sensor
Indicate the combustion airflow currently measured on the
air volume sensor (LMS).
TP
...
Pellet chute temperature in °C
Indicates the temperature currently measured by the TP
sensor in °C.
TL
...
Air volume sensor temperature in °C
Indicates the combustion air temperature currently meas-
ured by the LMS in the air intake pipe.
TR
...
Flue gas temperature in °C
Indicates the combustion temperature currently measured
by the TR sensor in the combustion chamber.
R1
ON / OFF
Relay "Reserve 1" (normally open)
R1 ON = 230 V or mains
R1 OFF = 0 V
Operating message.
ON = unit is operating (even if error is present). OFF = unit
is not operating
R2
ON / OFF
Relay "Reserve 2" (normally open)
R2 ON = 230 V or mains
R2 OFF = 0 V
Collective fault message.
ON = no fault
OFF = unit has fault / is manually deactivated.
R4
ON / OFF
Safety relay "Reserve 4" (normally
closed, potential-free, max. load capac-
ity 2 A)
R4 ON = Relay open
R4 OFF = Relay closed
Operating message (by means of monitored safety relay
without output voltage)
ON = unit is operating (even if error is present). OFF = unit
is not operating
BW
...
Operating hours since maintenance in
hours x 10
E.g. BW 56 = 560 hrs since last maintenance.
BG
...
Operating hours total in hours x 100
E.g. BG 56 = 5,600 operating hrs. total. Indicator cannot be
reset.
PW
Pellet consumption until maintenance in
tonnes
E.g. PW 1.2 = 1.2 t of pellets can still be burned before
next maintenance is due. E.g. PW 0.2 = maintenance 0.2 d
overdue
PG
Total pellet consumption in tonnes
E.g.: PG 66.5 = 66.5 t Pellets have been consumed in total.
Reset not possible.
SG
Total heating programme starts
E.g.: SG 123 = the heating programme was started a total
of 123 times. Because the indicator on the control board
can only display 999 at maximum, the start counter contin-
ues at 001 with the next start. SG 123 can therefore also
mean 999 + 123 (or 999 + 999 + 123, etc.)
Indicator cannot be reset.
SD
Heating programme starts during the
last 24 operating hours
E.g.: SD 5 = the heating programme was started 5 times
during the last 24 operating hours.
Fig. 95: Control
board
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wodtke Crazy.nrg at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wodtke Crazy.nrg in the language / languages: English as an attachment in your email.

The manual is 6.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wodtke Crazy.nrg

Wodtke Crazy.nrg Usermanual and installation guide - German - 72 pages

Wodtke Crazy.nrg User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info