484812
19
Zoom out
Zoom in
Previous page
1/253
Next page
19
DEGBESBG
DK
FI
FR
GR
IT
NL
NO
PL
PT
RU
SE
SK
SICZ
TR
HU
HR
The residual pressure lock ensures that the pot
can only be opened once fully depressurised,
i.e. once even the yellow pressure ring is no
longer visible.
If the yellow ring is still visible (K), this means
that the residual pressure lock has reacted. To re-
lease it, shortly move the sliding indicator (7) to
the ZU/LOCKED position.
When all the steam has escaped, briefly shake
the pot.
This will release any pockets of steam from the
food. Such bubbles may form especially when
cooking liquid or viscous foods, and they can
spit out when removing the lid. Now turn the
lid handle to the right as described, and open
the pot.
4.6. Information on induction hobs
The TransTherm® universal base (11) is suitable
for all hob types, also for induction.
In the case of induction hobs, a humming
noise may develop if on a high heat setting.
This noise has technical causes and does not
indicate that either your hob or your pressure
cooker is defective.
The pot size must correspond to the size of the
cooking zone. Otherwise – especially in the case
of small diameters – the cooking zone (mag-
netic zone) may not respond to the pot base.
5. Three methods for pressure
reduction
Important note:
If you have cooked foaming or expanding
foods (e.g. pulses, stock, grains), you should
not depressurise the pot using methods 2 or 3.
Jacket potatoes will burst if you let steam out
of the pressure cooker using method 2 or 3.
When quickly releasing steam using the slid-
ing indicator, or under running water, always
keep your hands, head and body away from
the danger area. You could otherwise be in-
jured by escaping steam.
Method 1
Remove the pot from the heat source. After a
short time, the cooking indicator (1) will fall.
Once it has fully disappeared into the handle (I),
slowly move the sliding indicator to AUF/OPEN (A).
During this procedure, any remaining residual
steam will escape from under the lid handle.
When no more steam escapes, shake the pot
briefly so that any pockets of steam which have
formed in the food can be released.
Method 2
In the case of foods with short cooking times
(e.g. vegetables), slowly and gradually move
the sliding indicator (7) in the direction of
AUF/OPEN (A) until steam escapes underneath
the lid handle.
Once the sliding indicator is fully at the
AUF/OPEN position, steam is no longer escaping
and the cooking indicator has fully dropped (I),
shake the pot and then open it.
Method 3
If you are worried by the escaping steam,
simply place the pot in the sink and run cold water
over the lid (L), until the cooking indicator (1) has
fully disappeared into the lid handle (I). Briefly
shake the pot and then open it.
BAL_PerfectPlus_Perfect_Innenteil_Alle Sprachen 19.07.11 11:18 Seite 19
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wmf PerfectPlus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wmf PerfectPlus in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info