677712
29
Zoom out
Zoom in
Previous page
1/38
Next page
69
8. Re-assemble the combination spout 6 and re-
attach it to the machine.
9. Now draw off one portion of hot water and turn
the key switch to “ ”.
10. Hold the milk intake hose in the hot water and
press the key. This causes steam to flow, for a
final clean.
Important!
Hot water will be flushed through the
combination spout 6 for about one minute.
Then turn the key switch 3 back to position “I”.
Additional recommendations:
If operational reasons do not allow time for step
6, we recommend purchasing a second froth head
unit.
It is advisable in any case and especially with low
flowthrough or when using milk at room
temperature, to carry out intermediate cleaning
after four to six hours’ operation. This should be
done as follows:
Turn the key switch 3 to “ ”, prepare the
cleaning solution as described in step 6 above
(5 ml WMF special cleaner from the
measuring bottle in a container with 0,5 l of
hand-hot water), place the milk intake hose in
the solution and press the key. (Cleaning
solution will be flushed through the
combination spout for about one minute).
Repeat the process twice with clean water and
finally turn the key switch back to “I”.
Never use milk remaining from the day before for
frothing!
3
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wmf BISTRO easy Series 8300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wmf BISTRO easy Series 8300 in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info