780283
48
Zoom out
Zoom in
Previous page
1/58
Next page
WILIER.COM
If your bike has disc brakes, pay attention not to damage the calipers, the
disc and the pads when inserting the disc in the caliper.
Installing a rear wheel with disc brake or caliper brake:
1. For quick-release system, set the lever to “open” by pulling it outwards from
the wheel.
2. If your bike is provided with shifter and derailleur, make sure the rear derailleur
is located in the outermost position (on the smallest sprocket) then pull the body
of the derailleur backwards, placing the chain on the smallest sprocket of the top
cassette.
3. Insert the wheel in the dropouts, pulling the wheel backwards to allow the hub
axle to enter the dropouts correctly.
4. For quick release locking system, pull the lever upwards and make sure to
bring it in lock position, using the necessary force to close it completely. The lever
should be parallel to the fork seat stay. For bolt-on wheels, tighten the fasteners
at the values specified in the table “Tightening torques” at the end of this manual.
5. Make sure to restore the brakes quick release mechanism if you disengaged
it previously. Check if the distance between the pads and the rim is correct by
spinning the wheel.
g4. TIRES REMOVAL
Use your hands to remove the tire from the rim or the tire levers. Do not use sharp
objects, such as screwdrivers, to remove the tire.
1. Deflate the tire completely.
2. Press the tire beads on the lower side of the rim bead seat, covering the entire
surface of the wheel.
3. Pull one tire bead upwards and out of the rim, starting from the side opposite
to the valve.
4. Proceed around the wheel, pulling the bead out until freeing the last bead.
5. Reach inside the tire and remove the inner tube.
6. Remove the second tire bead from the rim.
Tires installation
1. If you want to repair the inner tube, repair any punctures using appropriate tube
patches or replace the inner tube.
2. To check the rim and the inside of the tire, follow the procedures in paragraph
Inspection from chapter Wheels. When changing the inner tube or the tire, make
sure the new inner tube or the new tire have the same size as the old ones, or
contact your dealer to see which other sizes are compatible with your bike. You
can find the sizes on the side of the tire.
3. Inflate the inner tube until it starts taking shape.
4. Place the inner tube inside the tire.
48
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wilier Triestina bike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wilier Triestina bike in the language / languages: English as an attachment in your email.

The manual is 0.64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info