780283
47
Zoom out
Zoom in
Previous page
1/58
Next page
Removing a front wheel with disc brake or caliper brake:
1. To open the brake, follow the instructions in section Brakes .
2. For quick-release system, switch the quick-release lever from closed to open.
For bolt-on wheels, loosen the bolt using an appropriate key.
3. If the fork is provided with a locking device, loosen the locking tension by
unscrewing the nut and then remove the wheel.
Installing a front wheel with disc brake or caliper brake:
1. For quick-release system, set the lever to “open” by pulling it outwards from
the wheel.
2. Insert the wheel between the fork seat stays and insert the axle inside the
dropouts. For quick release system, make sure the lever is located on the left
side, taking as a reference the cyclist on his seat. For traditional (bolt-on) closing
system, lock it by adjusting the nut.
3. Keep the wheel steady and centre the wheel rim inside the fork.
4. For quick release locking system, pull the lever upwards and make sure to
bring it in lock position, using the necessary force to close it completely. The lever
should be parallel to the fork seat stay. For bolt-on wheels, tighten the fasteners
at the values specified in the table “Tightening torques” at the end of this manual.
5. Make sure to restore the brakes quick release mechanism if you disengaged
it previously. Check if the distance between the pads and the rim is correct by
spinning the wheel.
Removing a rear wheel with disc brake or caliper brake:
1. If your bike is provided with shifter and derailleur gearing system, proceed with
shifting the rear derailleur chain on the smallest (outer) cassette sprocket.
2. If your bike has caliper brakes, release the brakes quick release system.
3. If your bike is provided with shifter and derailleur gearing system, pull the
shifter backwards.
4. For quick release system, set the lever to open. For bolt-on wheels, loosen the
fasteners using appropriate tools, push the wheel forwards to remove the chain
from the front cassette sprocket. Then lift the wheel from the ground and remove
it from the rear dropouts.
47
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wilier Triestina bike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wilier Triestina bike in the language / languages: English as an attachment in your email.

The manual is 0.64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info