774433
76
Zoom out
Zoom in
Previous page
1/84
Next page
12
English
13 T-ON / T-OFF
Press the T-ON button to initiate the auto-ON timer. To cancel the auto-timer program, simply press this button again.
After pressing this button, will disappear and ”ON” will flash. 00:00 will be displayed for setting the ON time. Within 5
seconds, press the + or - button to adjust the time value. Each press of either button changes the time setting by 1 minute.
Holding down either button rapidly changes the time setting by 1 minute and then 10 minutes. Within 5 seconds after setting
the time, press the TIMER ON button to confirm.
Press the T-OFF button to initiate the auto-off timer. To cancel the auto-timer program, simply press the button again. Setting
the TIMER OFF is the same process as for TIMER ON.
14 TURBO
Press this button to activate/deactivate the Turbo function which enables the unit to reach the preset temperature in the
shortest possible time. In COOL mode, the unit will blow strong cooled air at a super high fan speed. In HEAT mode, the unit
will blow strong heated air at a super high fan speed.
15 LIGHT
Press the LIGHT button to turn on the display light and press this button again to turn off the display light. If the light is turned
on, is displayed. If the light is turned off, will disappear.
16 WIFI
Press the WIFI button to activate the function. Press again to stop the function.
More info can be found in WIFI attachments and wilfa.no, wilfa.com
17 Combination of ”+” and ”-” buttons: Locking
Press the ”+” and ”-” buttons simultaneously to lock or unlock the keypad. If the remote control is locked, will display. In this
case, by pressing any button, will flash three times.
18 Combination of ”MODE ” and ”-” buttons: Switching between Centigrade and Fahrenheit.
At unit OFF, press the ”MODE” and”-” buttons simultaneously to switch between °C and °F.
19 Combination of ”TEMP” and ”CLOCK” buttons: Energy-saving Function
Press ”TEMP” and ”CLOCK” simultaneously in COOL mode to start the energy-saving function. The display on the remote
control will display ”SE”. Repeat the operation to exit the function.
20 Combination of ”TEMP” and ”CLOCK” buttons: 8°C Heating Function
Press ”TEMP” and ”CLOCK” simultaneously in HEAT mode to start the 8°C Heating Function. The display on the remote
control will display ” ” and a temperature setting of ”8°C” (or 46°F, if applicable) will be adopted. Repeat the operation to
exit the function.
21 Backlighting Function
The unit lights up for 4 seconds when powering on for the first time, and 3 seconds when activated later.
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wilfa Trysil Floor Comfort at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wilfa Trysil Floor Comfort in the language / languages: English, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 20.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info