Manual Whynter ARC-110WD (page 9 of 20) (English)

727496

Zoom out

Zoom in

1/20

9 | P a g e

Window kit Installation

Your window kit has been designed to fit most standard vertical and horizontal windows.

However, it may be necessary for you to modify the installation procedures for your window.

NOTE:

If your window opening is smaller than the minimum length of the window slider kit, the window

slider kit can be cut to fit the window opening. Never cut into the exhaust and intake hose cut-

outs on the window slider kit.

If your window opening is larger than the maximum length of the window slider kit, additional

material will be needed to cover the open space such as, Plexiglas, PVC plastic, ply wood, etc.

Alternately, an additional window slider kit can be purchased to be used in combination with the

included kit.

When using the window slider kit on a window or sliding door, additional security measures may

be needed.

1. Open the window approximately 5”.

2. Adjust the length of the window slider to the same length

and width of the opening of the window. Cut the window slider if

necessary to fit the length of your window.

3. Insert the fixture through the back grooved side of the

window slider hose cut-out. Line up the fixture with the 4 screw

holes and tighten the fixture with 4 screws from the front side of

the slider panel. (Fig. 1)

4. Fit the window slider kit into the window opening and close

the window to secure the window slider kit. For long term

installation, you may screw the window kit into your window

frame.

5. Move the air conditioner close to the window, extend the

hoses to the necessary length, keeping them as short and as

straight as possible and attach the other end of each hose to

the window slider kit.

6. Align the tab cut-outs of the hose connectors to the tabs on

the fixtures and snap the hose connectors to the window slider

kit.

Figure 1

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Whynter ARC-110WD in the language / languages: English as an attachment in your email.

The manual is 2,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Whynter ARC-110WD Manual

Product: