727496
8
Zoom out
Zoom in
Previous page
1/20
Next page
8 | P a g e
INSTALLATION INSTRUCTIONS
Location
The air conditioner should be placed on a hard and level surface strong enough to support its weight. The
unit is equipped with caster wheels for portability. It should only be rolled on smooth, flat surfaces. Use
caution when rolling on carpet surfaces. Do not attempt to roll the unit over objects.
The air inlet and outlet should be free of any obstructions and be placed with at least 20” of clearance for
efficient air-conditioning and circulation.
Exhaust hose Installation
When using the air conditioner, the hot air from the exhaust hose must be exhausted out of the room to
complete the air exchange of the condenser. The intake hose is optional. When the unit is operating in
dehumidifying or fan-only mode, installation of the exhaust hose is optional.
1. Expand each end of the exhaust (large) and intake (small)
hoses about 6”.
2. Install the Large Exhaust Slide Locking Hose Connector to
one end of the exhaust hose (large hose) and the Large Exhaust
Hose Connector with tab cut-outs to the other end of the exhaust
hose (large hose) by turning counterclockwise.
3. Install the Small Intake Slide Locking Hose Connector to
one end of the intake hose (small hose) and the Small Intake Hose
Connector with tab cut-outs to the other end of the intake hose
(small hose) by turning clockwise.
4. Slide each of the slide locking hose connectors onto the
rear of the unit (See illustration)
Only extend the hose to the necessary length, keeping it as short
and as straight as possible. We do not recommend extending the
hose more than 9' long. If you are interested in purchasing an
additional 5’ exhaust hose, please contact support@whynter.com
for retail sales information or visit whynter.com for a list of optional
accessories.
Note: To remove the hose(s) from the unit, press the release
button and slide the hose and connector out.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whynter ARC-110WD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whynter ARC-110WD in the language / languages: English as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info