757682
14
Zoom out
Zoom in
Previous page
1/16
Next page
14
PROBLEM POSSIBLE CAUSE SOLUTION
Sealing is not optimal.
The level of sealing set is not
correct for the type of bag being
used.
Many consecutive cycles were
performed with sealing.
The bag is larger than the sealing
bar.
The edge of the bag was not
positioned correctly.
The edge of the bag is dirty.
The counter-pressure rubber and
the sealing bar are dirty.
The counter-pressure rubber and
the sealing bar are damaged.
Repeat the cycle by adjusting the
sealing level.
Wait at least 2 minutes between
one cycle and another to allow
the sealing bar to cool.
Use a suitable bag.
Position the edge of the bag
centrally and so that it protrudes
approximately 2 cm from the
sealing bar.
Avoid the edge forming creases
close to the sealing bar.
When the product is inserted,
turn the edge of the bag over so
that the outer part remains clean.
Clean the sealing bar and the
counter-pressure rubber.
Contact the Technical Support
service.
flashes. The pump has absorbed
moisture. Start the DRYING CYCLE.
During a cycle comes
on, accompanied by an
audible signal.
The vacuum is not activated.
The lid has not been closed.
The vacuum is not activated.
There is dirt on the seal of the lid.
The vacuum is not activated. The
lid seal is broken.
The pump won’t start. The pump
protection has been activated.
When the cycle has been started,
gently press the lid to activate
the vacuum.
Clean the tray and the seal.
Contact the Technical Support
service for replacement.
During a cycle with
external container
comes on accompanied by
an acoustic signal.
The lid of the external container
is not positioned correctly.
The external suction device was
not properly connected.
Correctly position the lid of the
external container.
Correctly connect the external
suction device to the packaging
machine and to the container.
It comes on
and flashes .
Many consecutive cycles were
performed and the oil in the
pump has overheated.
Cool the packaging machine for
at least 1 hour.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool W11SVD140 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool W11SVD140 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool W11SVD140

Whirlpool W11SVD140 User Manual - German - 16 pages

Whirlpool W11SVD140 User Manual - Dutch - 16 pages

Whirlpool W11SVD140 User Manual - French - 16 pages

Whirlpool W11SVD140 Installation Guide - All languages - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info