662557
10
Zoom out
Zoom in
Previous page
1/15
Next page
10
Use & Care guide
SOUNDS PRODUCED DURING OPERATION
Induction hobs may whistle or creak during normal operation.
These noises actually come from the cookware and are linked to the
characteristics of the pan bottoms (for example, when the bottoms are
made from dierent layers of material or are irregular).
These noises may vary according to the type of cookware used and to
the amount of food it contains and are not the symptom of something
wrong.
TROUBLESHOOTING
Check that the electricity supply has not been shut o.
If you are unable to turn the hob o after using it, disconnect it from
the power supply.
If alphanumeric codes appear on the display when the hob is
switched on, consult the following table for instructions.
Please note: The presence of water, liquid spilled from pots or any objects
resting on any of the hob buttons can accidentally activate or deactivate the
control panel lock function.
MAINTENANCE AND CLEANING
!
WARNING
Do not use steam cleaning equipment.
Before cleaning, make sure the cooking zones are switched o and that the residual heat indicator (“H”) is not displayed.
Important:
Do not use abrasive sponges or scouring pads as they may damage
the glass.
After each use, clean the hob (when it is cool) to remove any
deposits and stains from food residue.
Sugar or foods with a high sugar content can damage the hob and
must be immediately removed.
Salt, sugar and sand could scratch the glass surface.
Use a soft cloth, absorbent kitchen paper or a special hob cleaner
(follow the Manufacturers instructions).
Spills of liquid in the cooking zones can cause the pots to move or
vibrate.
After cleaning the hob, dry thoroughly.
If the iXelium ™ logo appears on the glass, the hob has been treated
with iXelium ™ technology, an exclusive Whirlpool finish which ensures
perfect cleaning results, as well as keeping the surface of the hob shiny
for longer.
To clean iXelium ™ hobs, follow these recommendations:
Use a soft cloth (microbre is best) dampened with water or with
everyday glass cleaning detergent.
For best results, leave a wet cloth on the glass hob surface for a few
minutes.
Error code Description Possible causes Solution
The control panel switches o because
of excessively high temperatures.
The internal temperature of
electronic parts is too high.
Wait for the hob to cool down before
using it again.
The connection voltage is wrong.
The sensor detects a discrepancy
between the appliance voltage and
that of the mains supply.
Disconnect the hob from the mains
and check the electrical connection.
Disconnect the hob from the power supply. Wait a few seconds then reconnect the hob to the power supply.
If the problem persists, call the service centre and specify the error code that appears on the display.
C81, C82
F02, F04
F01, F06, F12, F13, F25,
F34, F35, F36, F37, F41,
F47, F58, F61, F76
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool SMO 658 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool SMO 658 in the language / languages: English as an attachment in your email.

The manual is 6,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool SMO 658

Whirlpool SMO 658 User Manual - German - 15 pages

Whirlpool SMO 658 User Manual - Dutch - 15 pages

Whirlpool SMO 658 User Manual - French - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info