607067
7
Zoom out
Zoom in
Previous page
1/54
Next page
7
EN
electrical store.
For the Republic of Ireland
only
The information given in
respect of Great Britain will
frequently apply, but a third
type of plug and socket is also
used, the 2-pin, side earth
type.
Socket outlet / plug (valid
for both countries)
If the tted plug is not suitable
for your socket outlet, please
contact After-sales Service for
further instruction. Please do
not attempt to change plug
yourself. This procedure needs
to be carried out by a qualied
technician in compliance with
the manufactures instructions
and current standard safety
regulations.
CORRECT USE
Only use detergents and/or
additives that are specically
produced for domestic
washing machines/tumble
dryers.
Do not exceed the maximum
load allowed. Check the
maximum load allowed in the
programme chart.
Turn o the tap when not in
use.
WARNING
Hands shall not be inserted
into running water extracting
tub.
Do not use any solvents
(e.g. turpentine, benzene),
detergents containing
solvents, scouring powder,
glass or general purpose
The power supply ranges are
indicated on the rating plate.
Regulations require that the
appliance is earthed.
For installation to comply with
current safety regulations,
an omnipolar switch with
minimum contact gap of 3mm
is required.
If the power cable is damaged
it must be replaced with an
identical one. The power
cable must only be replaced
by a qualied technician
in compliance with the
manufacturer instruction and
current safety regulations.
Contact an authorized service
center.
The electrical components
must not be accessible to the
user after installation.
The power cable must be long
enough for connecting the
appliance, once tted in its
housing, to the main power
supply.
Do not use extension leads.
Do not pull the power supply
cable.
Do not use multiple plug
adaptors if the appliance is
tted with a plug.
For appliances with tted
plug, if the plug is not suitable
for you socket outlet, contact a
qualied technician.
Do not touch the appliance
with any wet part of the body
and do not operate it when
barefoot.
Do not operate this appliance
if it has a damaged mains cord
or plug, if it is not working
properly, or if it has been
damaged or dropped. Do not
immerse the mains cord or
plug in water. Keep the cord
away from hot surfaces.
When using a residual current
circuit breaker (RCCB), only use
a model marked with
ELECTRICAL CONNECTION
FOR GREAT BRITAIN AND
IRELAND ONLY
Fuse replacement
If the mains lead of this
appliance is tted with a BS
1363A 13amp fused plug, to
change a fuse in this type of
plug use an A.S.T.A. approved
fuse to BS 1362 type and
proceed as follows:
1. Remove the fuse cover (A)
and fuse(B).
2. Fit replacement 13A fuse
into fuse cover.
3. Ret both into plug.
Important:
The fuse cover must be
retted when changing a fuse
and if the fuse cover is lost the
plug must not be used until a
correct replacement is tted.
Correct replacement are
identied by the colour insert
or the colour embossed in
words on the base of the plug.
Replacement fuse covers
are available from your local
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool FSCR 10420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool FSCR 10420 in the language / languages: English as an attachment in your email.

The manual is 6,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool FSCR 10420

Whirlpool FSCR 10420 Quick start guide - English - 8 pages

Whirlpool FSCR 10420 Quick start guide - German - 8 pages

Whirlpool FSCR 10420 Usermanual and installation guide - German - 54 pages

Whirlpool FSCR 10420 Quick start guide - Dutch - 8 pages

Whirlpool FSCR 10420 Usermanual and installation guide - Dutch - 54 pages

Whirlpool FSCR 10420 Quick start guide - French - 8 pages

Whirlpool FSCR 10420 User Manual - French - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info