Manual Whirlpool CareMotion 1408 SM (page 3 of 4) (English)

539835

Zoom out

Zoom in

1/4

- the sensor technology adapts drum movement, water, energy and programme duration to your wash load

5019 300 01130

CONSUMPTION DATA

Power consumption in Off mode 0.16 W / in left-on mode 0.16 W

Programme

Temperature

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme Duration

(hours : minutes)

without “Rapid” with “Rapid”

Mixed 40 4.0 60 0.64 1:00 —

Cotton 95 8.0 80** 2.60 2:40 —

Cotton 60 8.0 62 1.58 2:20 1:45

Cotton 40 8.0 55 0.78 2:05 1:15

Synthetics 60 3.0 50** 0.93 1:37 1:12

Synthetics 40 3.0 45 0.50 1:20 0:55

Delicates 40 1.5 65 0.60 0:50 —

Delicates 30 1.5 65 0.37 0:46 —

Wool/Handwash 40 1.0 49 0.55 0:40 —

White 40 8.0 53 0.59 2:20 —

Light colours 40 4.0 49 0.39 1:20 —

Dark 40 4.0 39 0.48 1:40 1:15

Speed 15 30 3.0 18 0.08 0:15 —

AquaEco 40 3.0 19 0.38 1:00 —

Cotton *

60 8.0 54 0.82 4:00 —

Cotton *

60 4.0 36 0.64 3:30*** —

Cotton *

40 4.0 36 0.58 3:30*** —

P01 – Big items 40 3.0 53 0.61 1:30 —

P02 – Baby 60 4.0 57** 0.55 1:30 1:10

P03 – Bed linen 60 3.5 19 1.65 2:00 —

P04 – Jeans 40 4.0 53 0.42 1:30 1:10

P05 – Business 40 1.5 65 0.60 0:50 —

P06 – Sport 30 3.0 51 0.59 1:35 1:11

P07 – Cashmere 30 1.0 40 0.45 0:36 —

P08 – Mini load 30 1.0 36 0.24 0:45 —

Consumption values were measured in normalized conditions, in compliance with IEC/EN 60456.

In the home, they may vary depending on the individual water supply pressure and temperature, the load

and the type of wash. The consumption data indicated are based on an inlet water temperature of approx.

15 °C through the cold fill valve as well as the hot fill valve (if available). If your washing machine has a hot

fill valve, connection of this valve to hot water supply will lower the energy consumption by reduced

heating times, depending on the individual hot fill inlet water temperature.

Water and energy consumptions refer to the default setting of the programmes, with temperature and

load as indicated in the table; selecting any options or changing the spin speed will also change the

consumption data.

The programme duration may differ from the values indicated above as it depends on the operation

conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use).

** To reduce the water temperature, some cold water is added at the end of the main wash cycle before

the water is drained.

*** Automatic adaptation of programme duration after detection of wash load.

* Reference programmes for Energy Label. For reasons of energy saving, the real water temperature

may deviate from the declared cycle temperature.

Load the laundry, close the door and turn the

programme selector to the desired programme -

the “Start/Pause” indicator blinks. The temperature

and spin speed shown on the display can be altered

by pressing the “Temperature” or “Spin” button.

If you do not use the Dosing Aid, add detergent

now. The washing machine is designed to save

energy; therefore, if you have selected a

programme but do not start it within about a

quarter of an hour, it will switch off automatically. To

switch it on again, turn the programme selector to

“Off/O” and then to the desired programme again.

This feature offers the possibility to select and save,

out of a list of 8 special programmes, the one that

most meets your needs.

When you select the “MyProgram” position, a code

ranging from “P01” to “P08” will appear on the

display (see programme table to understand which

programme corresponds to the displayed code).

Use the “+” and “-” buttons to select the available

programmes, and button “Ok” to confirm your

choice. If you do not confirm it within a few seconds,

the selected programme is automatically

confirmed, and its default settings appear on the

display.

You can now select options or modify temperature/

spin speed, as you do it for any other programme,

according to the possibilities indicated in the

programme table. Once a programme of the

“MyProgram” list has been confirmed, it will be

remembered next time you select “MyProgram” on

the selector.

If the combination programme/option or option/

option is not possible, the indicator switches off

automatically.

For certain programmes, an option may already be

preset; if you want you can deselect it.

“Colours 15° plus” button

• Helps to maintain the colours of dark and

coloured laundry by pre-treatment with fabric

softener, before the main wash cycle.

• Your laundry will be washed with cold water;

thus you save most of the energy used for water

heating.

• Appropriate for lightly soiled dark and coloured

laundry without stains, made of cotton/linen,

synthetics or blends of both. Recommendable

for new garments of that type which usually fade

most during the first washes. - Make sure that

the fabrics are suitable to be treated with

softener.

• Use detergent for coloured or dark laundry

which is appropriate also for cold wash

temperatures (15 or 20°C).

• Add the recommended amount of liquid fabric

softener to the PREWASH chamber of the

detergent dispenser; respect the dosing

recommendations on the softener bottle.

• If you intend to use liquid detergent for the main

wash, add the additional insert delivered with

your washing machine to the MAIN WASH

chamber of the detergent dispenser.

Observe the indications in your Instructions for

Use / Where to put Detergents and Additives.

IMPORTANT: Do not add the insert to the main

wash chamber when using powder detergent for

the main wash.

• This option will prolong the programme by

about half an hour.

• Not Selectable for Cotton 70 - 95°C.

“BioStain 15°” button

• Supports the removal of stains.

• The programme you selected will begin with a

cold water wash phase; this will prolong the

programme duration by about 10 minutes.

• Appropriate for all kinds of stains, except grease/

oil.

• Pre-treatment recommended for obstinate

stains.

• Not selectable for Cotton 70 - 95°C.

“Rapid” button

• Enables quicker washing by shortening the

programme duration.

• Recommendable for only lightly soiled laundry.

• Not selectable for Cotton 70 - 95 °C.

“Prewash” button

• Adds a prewash cycle to the wash programme

selected; prolongs the programme by about a

quarter of an hour.

• Recommended for heavily soiled laundry

(e.g. containing sand or granular dirt).

• Do not use liquid detergent for the main wash

when activating the “Prewash” option.

LOAD LAUNDRY AND SELECT

PROGRAMME

MyProgram

SELECT OPTIONS IF DESIRED

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool CareMotion 1408 SM in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool CareMotion 1408 SM

Whirlpool CareMotion 1408 SM Quick start guide - German - 4 pages

Whirlpool CareMotion 1408 SM User Manual - German - 15 pages

Whirlpool CareMotion 1408 SM Quick start guide - Dutch - 4 pages

Whirlpool CareMotion 1408 SM Quick start guide - Dutch - 15 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Whirlpool CareMotion 1408 SM Manual

Product: