539835

Whirlpool CareMotion 1408 SM Manual

4
Zoom out
Zoom in
Previous page
1/4
Next page
- the sensor technology adapts drum movement, water, energy and programme duration to your wash load
5019 300 01130
Soil level” button
• Adapts the programme duration to the soil level
of your laundry. Also influences the detergent
quantity recommendation when using the
“Dosing Aid” button.
= lightly soiled - = normally soiled -
= heavily soiled
Not all soil levels are selectable for each
programme.
“Spin” button (incl. “Rinse Hold” )
• Select a spin speed differing from the preset
one.
• Press the button to set another spin speed.
• If you select spin speed “0”, the final spinning is
cancelled and the water is drained out only.
However, intermediate spin phases remain
during the rinse.
• If you select “Rinse hold” , the laundry
remains in the last rinse water without
progressing to the final spin cycle, to avoid
creasing and prevent colours from changing.
To activate the “Rinse hold”, press the “Spin”
button repeatedly until the “Rinse hold” symbol
on the display lights up.
- The wash programme stops to “Rinse hold”
when the “Rinse hold” symbol on the
display blinks; the “Start/Pause” indicator
blinks as well.
- To terminate the “Rinse hold” by spinning the
laundry, press “Start/Pause” - the laundry will
be spun with the default spin speed. You can
also select another spin speed with the “Spin”
button before you start the spin cycle with
“Start/Pause”.
- To terminate the “Rinse hold” by draining the
water without spinning, press the “Spin”
button until spin speed “0” appears on the
display; then press “Start/Pause” to start the
draining.
- Do not leave the laundry to soak for too long
in the “Rinse hold” (especially silk!).
With this function you can postpone your
programme to complete at a later time: press the
button to select in how many hours the programme
shall be finished. Thus, it allows you to have your
laundry ready at a particular time and to profit from
more favourable energy rates during the night, for
example.
• Do not use liquid detergent when activating this
function.
• The time until the “Cycle end” can be selected in
full hour time segments (1 to 24 h). When you
press the button, the shortest possible time will
be displayed; keep on pressing the button to
loop through all the available times. To remove it
again, keep on pressing the button until you see
the value “0:00”.
• When you have selected the desired time until
the “Cycle end”, press “Start/Pause” - the
countdown will begin.
• During the countdown, you can still modify the
programme setting (select or deselect options,
change spin speed etc.). If the modifications
prolong the programme duration so that it
overruns the originally set time until the
“Cycle end”, the programme will start
immediately.
• Sometimes the programme may finish before
the selected time until the “Cycle end” has
expired (e.g. for small loads). In this case, the
washing machine will tumble the laundry
regularly to keep it fresh, until the selected
“Cycle end” time has expired. During tumbling,
the display will show an animation. The
tumbling phase can be stopped at any time
either by pressing any button or by rotating the
programme selector; the animation will stop
and the door will unlock in about 1 minute as
indicated on the display.
With the “Dosing Aid” button, you can make your
washing machine indicate you the recommended
detergent quantity for your wash load, depending
on the soil level selected and the size of the load.
• Helps to save detergent and protect the
environment and also sensitive skin by avoiding
detergent overdosing.
• Before you use this function, you must adapt the
washing machine to the dosing amounts which
are recommended for the detergents you use.
Also check if your region’s water hardness
corresponds with the water hardness level “soft”
of your washing machine - if not adapt it.
• Select programme, options and cycle end
BEFORE using the “Dosing Aid” button.
For any details, refer to the separate “Dosing Aid”
Instructions for Use.
Before starting and after end of a programme, the
indicator lights to show that the door can be
opened. As long as a wash programme is running,
the door remains locked and must on no account
be forced open.
In case you have an urgent need to open it during a
running programme, refer to “Reset a running
programme before the end”.
SET CYCLE END
DETERGENT DOSING
RECOMMENDATION
“DOOR OPEN” INDICATOR
The “Eco monitor” gives you a rough feedback
about the power consumption of the programme
setting you selected.
As soon as you turn the programme selector to any
programme, the “Eco monitor” is on.
.
The indicator on the left is to show that the “Eco
monitor” is active.
The four indicators next to it show the degree of
consumption: the less power your programme
setting is forecasted to consume, the less indicators
will light up. This depends on the programme,
temperature and options selected, and also on the
size of the wash load.
For that reason, the forecasted degree of power
consumption may adapt when the washing
machine detects the wash load.
Open the tap and press the “Start/Pause” button
. The “Start/Pause” indicator lights up.
When the laundry load is detected or the
programme duration is adapted, the display shows
an animation.
Prevents children from starting a wash cycle or
changing the settings of a running programme.
Cannot be activated or deactivated when the
programme selector is in the “Off/O” position.
To activate the child lock:
• Turn the programme selector to a programme
position, or run a programme as usual.
• Press the 2 buttons marked with the key
symbol simultaneously for at least
3 seconds. A key-like symbol will shortly appear
on the display to indicate that the child lock is
active.
Any time you try to change a programme setting
with active child lock, the display will briefly show
the key-like symbol. The programme setting cannot
be changed anymore. The only change possible is
to switch the washer off by turning the programme
selector to the “Off/O” position.
To deactivate the child lock, proceed in the same
way as for activating it.
If one of the failure indicators lights up, or in case of
any malfunction, consult the “Troubleshooting
Guide” in your Instructions for Use.
Spin speed on display blinks: Unbalance during
spinning.
• The “Door open” indicator lights up. The
display shows “End”. After about a quarter of an
hour, the washing machine will switch off
completely to save energy.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
The symbol will light up at the end of the
programme if you used too much detergent. Use
less detergent next time.
1. Press the “Start/Pause” button to pause the
programme. The indicator blinks.
2. Select the new programme, temperature, any
options and another spin speed if you want.
3. Press the “Start/Pause” button again. The
new programme continues at the same
position where the previous programme was
interrupted. Do not add detergent for this
programme.
The “Reset/Drain” button cancels a running
programme.
•Press and hold the “Reset/Drain” button
for a few seconds; an animation appears on the
display. The water is drained out; it may last
some time until you can open the door.
ECO MONITOR
PROGRAMME START
CHILD LOCK
FAILURE INDICATORS
PROGRAMME END
DETERGENT OVERDOSAGE INDICATOR
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
RESET A RUNNING PROGRAMME
Whirlpool is a registered trademark of Whirlpool USA
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool CareMotion 1408 SM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool CareMotion 1408 SM in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool CareMotion 1408 SM

Whirlpool CareMotion 1408 SM Quick start guide - German - 4 pages

Whirlpool CareMotion 1408 SM User Manual - German - 15 pages

Whirlpool CareMotion 1408 SM Quick start guide - Dutch - 4 pages

Whirlpool CareMotion 1408 SM Quick start guide - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info