537900
11
Zoom out
Zoom in
Previous page
1/12
Next page
GB 11
Description of red indications
The red light
will go on
(if fitted to the
appliance)
Alphanumeric
indications shown
on the display
(on models fitted
with them)
Description
Cause
Solutions
“Water Tap
Closed”
E00
The appliance has insufficient or no water supply.
The
“Start”
light goes on.
Check that:
The water tap is fully open and the water pressure
is sufficient.
The water supply hose is kinked.
the mesh filters of the water supply could be
blocked (see “Care and maintenance”.
The water hose is frozen up.
When the problem has been resolved, re-start the
programme by pressing the
“Start”
button. If the
fault occurs again, contact the After-Sales Service
[see next chapter).
“Clean Pump”
E01
The water is not pumped out of the washing
machine. The appliance stops in mid programme;
unplug the appliance and check if:
there are kinks in the drain hose.
the filter or pump is blocked (see chapter
“Removing The Filter/Draining Residual Water”;
make sure the water has cooled before
draining the appliance).
the water in the water inlet hose is frozen.
When you have resolved the problem, turn the
programme selector to “Off/O” to reset the
appliance; next re-start the desired programme. If
the fault occurs again, contact the After-Sales
Service [see next chapter).
“Electrical module fault”
“Service”
Door locking error
E02
E03
Unplug the appliance and turn the programme
selector to
“Off/O”
, then turn the appliance ON
again. Select the “Drain/Spin” programme and re-
start within 15 seconds.
“Fod”
E04
Turn the appliance OFF by turning the programme
selector to
“Off/O”
; Open and close the door again
with more force then reselect the programme and
press
“Start”
.
If any of the faults described above persists, unplug
the appliance, turn off the water supply and contact
our After-Sales Service (see next chapter).
30120031GB.fm Page 11 Thursday, January 8, 2009 2:58 PM
Black process 45.0° 150.0 LPI
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool AWG 910 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool AWG 910 in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool AWG 910

Whirlpool AWG 910 Quick start guide - English - 2 pages

Whirlpool AWG 910 User Manual - German - 12 pages

Whirlpool AWG 910 User Manual - German - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info