537900
9
Zoom out
Zoom in
Previous page
1/12
Next page
GB 9
CARE AND MAINTENANCE
Appliance exterior and control panel
Can be washed down with a soft, damp cloth.
A little neutral detergent (non abrasive) can also
be used
Dry with a soft cloth.
Appliance internal parts
After each wash, leave the door open for some
time to allow the inside of the appliance to dry.
If you never or seldom wash your laundry at
90°C, we recommend to occasionally run a 90°C
programme without laundry, adding a small
amount of detergent, to keep the interior of the
appliance clean.
Door seal
Clean with a damp cloth when necessary.
Check the condition of the door seal regularly.
Filter
Check and clean the filter regularly, at least two
or three times a year (see “Removing the filter /
Draining residual water”)
Water supply hose
Check the hose regularly for brittleness and
cracks.
Regularly check and clean the mesh filter inside
the inlet hose (see “Cleaning the mesh filter in
the water supply hose(s)”).
Do not use flammable fluids for cleaning the appliance.
Detergent drawer
Clean the detergent dispenser regularly, at least three or
four times a year to prevent a build-up of detergent.
1.
Press “PUSH” and extract the dispenser drawer.
2.
Remove the cover grid from the fabric softener compartment.
Remove the separator from the main wash compartment by
pulling it upwards (see dark arrows).
3.
Wash all the parts under running water.
4.
Clean detergent from the dispenser with a damp cloth.
5.
Refit the separator and the cover grid in the detergent dispenser
and fit the dispenser back inside its housing.
Inlet hose
If a supply hose shows a damage, replace it by a new hose of the
same type, available through our After-Sales Service or your
specialist dealer.
Contact our After-Sales Service team or specialist dealer to obtain a
replacement hose.
Cleaning the mesh filter in the water supply hose(s)
1.
Close the tap and loosen the inlet hose on the tap.
2.
Clean the internal mesh filter and screw the water inlet hose back
onto the tap.
3.
Now unscrew the inlet hose on the rear of the washing machine.
4.
Pull off the mesh filter from the washing machine connection
with universal pliers and clean it.
5.
Refit the mesh filter and screw the inlet hose on again.
6.
Turn on the tap and check that the connections are water-tight.
A
30120031GB.fm Page 9 Thursday, January 8, 2009 2:58 PM
Black process 45.0° 150.0 LPI
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool AWG 910 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool AWG 910 in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool AWG 910

Whirlpool AWG 910 Quick start guide - English - 2 pages

Whirlpool AWG 910 User Manual - German - 12 pages

Whirlpool AWG 910 User Manual - German - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info