41
IMPORTANT:
Piping Joints Thermal Insulation:
Wrap the piping joints with thermal insulating materials and then wrap with a vinyl tape.
Thermal Insulation piping:
a. Place the drain hose under the piping.
b. Insulation material: polythene foam over 6mm in
thickness.
• Drain pipe should point downward for easy drain
flow.
• Do not twist the drain pipe, leave it sticking out or
waving around, do not immerse the end in water.
• If an extension drain hose is connected to the drain
pipe, make sure to be thermally insulated when
passing it through the indoor unit.When the piping is
directed to the right, piping, power cord and drain
pipe should be thermally insulated and fixed at the
rear of the unit with a piping fixer.
A.Insert the pipe fixer to the slot.
B. Press to hook the pipe fixer onto the base.
Thermal insulation
Wrapped with vinyl type
Large pipe
Thermally
insulated tube
Small pipe
Power cord 1
(for heat-pump)
Drain hose
Power cord
Base
Piping fixer
Base
Piping fixer
Insert here
Base
Hook here
Large
pipe
Drain
hose
Small
pipe
Large
pipe
Drain
hose
Small
pipe
