Manual Whirlpool AMD 052 (page 21 of 21) (English)

516196

Zoom out

Zoom in

1/21

How to Purge Air Tubes:

(1). Unscrew and remove caps from 2 and 3-way valves.

(2). Unscrew and remove cap from service valve.

(3). Connect vacuum pump flexible hose to the service valve.

(4). Start vacuum pump for 10-15 minutes until it reaches an absolute vacuum of 10 mm Hg.

(5). With vacuum pump still running close the low pressure knob on vacuum pump manifold. Then stop

vacuum pump.

(6). Open 2-way valve 1/4 turn, then close it after 10 seconds. Check tightness of all joints using liquid

soap or an electronic leak detector.

(7). Turn 2 and 3-way valves stem. Disconnect vacuum pump flexible hose.

(8). Replace and tighten all valve caps.

NOTES:

• Please read this manual carefully before installing and using the appliance;

• Do not let air enter the refrigeration system or discharge refrigerant when moving the air conditioner;

• Check the connecting cables and pipes carefully, make sure they are correct and firm before connecting

the power of the air conditioner;

• Test-run the air conditioner after finishing installation and record details of operation;

• Type of fuse used on indoor unit: 3.15/250V;

• For 9k,12k,18k models, fuse of outdoor unit: 15A/250V;

• The fuse for the whole unit is to be provided by the user according to the current at maximum power;

• Input or use other over-current protective device instead;

• Only the air conditioner can be connected to the power line;

• The power connection for the air conditioner has to be done at the main power distribution which has

to be of a low impedance;

• In order to ensure the suitability of the equipment for connection, the user should consult with the

supply authority, if necessary, that the service current capacity at the interface point is sufficient for the

equipment;

• Refer to the rating plate of the equipment for power consumption details;

• Risk of electric shock can cause injury or death: Disconnect all Remote electric power supplies before

servicing;

• When charging refrigerant into the system, make sure to change in liquid state, if refrigerant of the

appliance is R410a. Otherwise, chemical composition of refrigerant (R410a) inside the system may

change and thus affect performance of the air conditioner;

• According to the character of refrigerant (R410a), the pressure of the tube is very high, so be sure to

careful when you install and repair the appliance;

• If the supply cord is damaged, it must be replaced by the manufacturers After-Sales Service

or a qualified technician in order to avoid a hazard;

• The air conditioner must be installed by professional engineer.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool AMD 052 in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Whirlpool AMD 052 Manual

Product: