73076
4
Zoom out
Zoom in
Previous page
1/8
Next page
4
Installation and fixing
The installer is responsible for any damage or
injury resulting from incorrect installation.
To guarantee correct operation, the appliance
must be installed on a perfectly flat surface.
The worktop must be -20 50mm thick.
If necessary, cut the kitchen unit and worktop to fit before
installing the hob. Clean the cutout of any chips that could
compromise appliance operation.
For cut-out dimensions, see the figure below.
For flush mounted installation or setting
into a marble worktop, contact the After-sales
Service for the installation kit and necessary
instructions.
4812 310 19277 Installation kit for marble
worktop.
4801 211 00112 Installation kit for flush fitted
worktop.
To guarantee correct operation, the appliance must be
installed on a perfectly flat surface.
The worktop must be 20-50 mm thick.
If necessary, cut the kitchen unit and worktop to fit before
installing the hob. Clean the cutout of any remaining dust
that could compromise appliance operation.
For the distance between the underside of the induction
hob and the kitchen unit (or separating panel), observe the
dimensions given in the figure at the side. If a column unit
is installed adjacent to the hob, leave a distance of at least
100 mm from the edge of the hob.
Assembly
1. Position the clips (A) in the spaces provided on the
hob trim (fig. 3) if not already positioned.
2. Measure the centre point of the vertical sides of the
cut-out (fig. 1)
3. Fit the brackets (C) in the centre of the vertical sides,
aligning the upper edge of the brackets so that they are
flush with the worktop surface (fig. 2).
4. Fix the brackets with the 4 screws supplied (B) using
the holes provided.
5. Insert the hob in the cutout, making sure the clips (A)
are secured in the spaces provided (fig. 4).
490
+2
0
580
510
483
553
min. 50
770
483
510
742
R min. 6.5
max. 8
min. 50
52
+1
0
560
+2
0
490
+2
0
52
+1
0
R min. 6.5
max. 8
Dimensions
in mm
750
+2
0
min.
5
min. 20
min. 5
C
B
fig. 2
fig. 1
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool ACM 702 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool ACM 702 in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool ACM 702

Whirlpool ACM 702 User Manual - German - 8 pages

Whirlpool ACM 702 User Manual - Dutch - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info