784857

Wellis W2000 Manual

90
Zoom out
Zoom in
Previous page
1/108
Next page
THE FIRST CLF CALIBRATION
Using the provided Aseko test kit to manually check the
chlorine level of your spa by taking a sample from the output
stream of spa water.
In the main menu of the CHEMICAL TREATMENT device select
SETTINGS, then the CALIBRATION menu item.
Select the yellow chlorine box on the left of the screen. If the
probe is broken or has any other malfunction, you will receive
the following notification.
Compare the data shown by the CHEMICAL TREATMENT
device with the results of the manual measurement. If there
is a difference, adjust the values shown by the CHEMICAL
TREATMENT device with the + and - buttons until they match
the manual results, then select OK to save.
If the chlorine level data of the manual test matches the
readings of the CHEMICAL TREATMENT device, your probe
measures chlorine level accurately.
SUGGESTION:
Measure the chlorine level of your spa weekly.
SAFETY FUNCTIONS:
The CHEMICAL TREATMENT device has safety functions that
prohibit overdosage of the spa. The device uses the follow-
ing safety functions:
– Maximal safety dosage
– Overly fast change in the pH value
– Dosing without probe reading
If you adjust the parameters of the water appropriately, the
CHEMICAL TREATMENT device calculates the maximum
hourly dosage of the disinfectant. Thanks to this function
overdosage is highly improbable.
The maximal safety dosage moves between 1 and 11 ml/m3/
hour. In extreme conditions the value rises to 25 ml/m3/hour.
Overly fast change in the pH value
can be caused by heavy rain, adding large amounts of water,
or inordinate usage. If any of these occur the CHEMICAL
TREATMENT device shuts down dosage of the pH medium
for 2 hours and only restarts it when the pH value stabilizes.
Change in the pH value without a probe reading.
Depending on the water hardness the CHEMICAL TREAT-
MENT device reports an error and shuts down dosage of the
pH agent.
– From soft to moderately hard < 9°dH.
If there is no change in the pH value, the ASIN Aqua device
shuts down dosage of the pH agent after 10 doses.
– Hard 9–21°dH.
If there is no change in the pH value, the ASIN Aqua device
shuts down dosage of the pH agent after 15 doses.
– Extra hard > 21,01°dH.
If there is no change in the pH value, the ASIN Aqua device
shuts down dosage of the pH agent after 25 doses.
WARNING! Never mix the pH agent with a chlorinated
substance. Always prevent mixing of the pH agent with a
chlorinated substance by rinsing whenever you are performing
maintenance on the plastic cleaning pipes or valves.
WARNING! Always ensure that the spa water is chemically
clean and uncontaminated before setting up your CHEMICAL
TREATMENT device.
When setting up the CHEMICAL TREATMENT device ensure
that it is no more than 8 meters far from the point where the
chemicals connect to the spa’s water supply.
When setting up the ASIN Aqua device ensure that there are no
more than 2 vertical meters between the wall mount and the
point where the chemicals connect to the spa’s water supply.
WARNING! Usage of pliers and wrenches damages the tube and
causes fitting problems.
WARNING! This parameter affects the maximum hours duration
of the disinfection process.
WARNING! The filtration time frame should be set as the daily
operating time of the CHEMICAL TREATMENT device.
WARNING! This parameter affects the maximum hours duration
of the disinfection process.
WARNING! These parameters affect the maximum hours dura-
tion of the disinfection process.
pH CALIBRATION
WARNING! Probes do NOT require calibration most of the
time. We authenticate the pH probe of the CHEMICAL TREAT-
MENT device at the factory.
If you do not let the probes stabilize in the water before the
calibration and usage of the system, we cannot guarantee
proper function of the CHEMICAL TREATMENT device. Check
the pH calibration once a year and change the probe if
needed.
OPTIONAL ACCESSORIES  CHEMICAL TREATMENT
88
… 90 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wellis W2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wellis W2000 in the language / languages: English as an attachment in your email.

The manual is 11.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wellis W2000

Wellis W2000 User Manual - German - 124 pages

Wellis W2000 User Manual - Dutch - 113 pages

Wellis W2000 User Manual - French - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info