784857
89
Zoom out
Zoom in
Previous page
1/108
Next page
SUGGESTION:
The recommended filtration timeframe is 24 hours. The
minimal filtration timeframe is 6 hours.
After selecting the spa filtration parameters for the CHEMI-
CAL TREATMENT device adjust the parameters of the water
as well. The spa filtration and water parameters determine
what settings the CHEMICAL TREATMENT device will use for
correct monitoring and regulation of the spa.
If you change the mass of the water of the filtration time-
frame of the spa, you must update the parameters.
- Depth
- Length
- Width
USER GUIDE FOR THE CHEMICAL TREATMENT
DEVICE
Setting the parameters of the water
The parameters of the water settings define the attributes
of the spa water for the CHEMICAL TREATMENT device. The
CHEMICAL TREATMENT device also contains presets based on
the following conditions:
- Indoor or outdoor spa.
- The level of water hardness.
- The average water temperature.
Because each of these parameters affect the operation of the
CHEMICAL TREATMENT device, appropriate parameters of
the water must be defined to ensure optimal performance
of the CHEMICAL TREATMENT device in your spa. Set water
parameters when installing CHEMICAL TREATMENT DEVICE.
1. In the main menu select SETTINGS, then PARAMETERS,
then select the spa PARAMETERS menu item to enter the
next screen.
2. SPA Select your spa type using the checkboxes.
- INDOOR
- OUTDOOR
- EXTREME CONDITIONS
3. AVERAGE TEMPERATURE
Select the average temperature of the spa.
WARNING! This parameter affects the maximum hours dura-
tion of the disinfection process.
4. WATER HARDNESS:
Enter the water hardness level of the spa. The unit of mea-
surement is dH (degrees of hardness) and can be 0 - 9 soft,
9 - 21 hard, and 21+ extra hard.
Before calibrating the CHEMICAL TREATMENT device
ensure that the parameters entered match the properties
of the spa.
©pH settings
Setting the desired values:
1. In the main menu select SETTINGS, then the PARAMETERS
menu item.
2. Select the blue pH button on the right.
3. Adjust the pH value using the - and + buttons.
CALIBRATING THE pH PROBE OF THE CHEMICAL TREATMENT
DEVICE:
1. Check the pH value of your spa manually.
Use an Aseko tester.
Displayed value
-6,8
-6,8
-7,0
-6,8
-6,4
SUGGESTION:
We recommend a pH value of between 6.5 and 7.6.
- Use a low pH value if the spa is cleaned via active oxygen
system.
- Use a high pH value if the spa is cleaned via saltwater
electrolysis system.
- Use a pH value of 7.0 if the spa is cleaned via chlorine.
2. In the main menu of the CHEMICAL TREATMENT device
select SETTINGS, then the CALIBRATION menu item.
3. Select the blue pH button on the right.
4. Compare the data shown by the CHEMICAL TREATMENT
device with the results of the manual measurement.
If there is a difference, adjust the values shown by the
CHEMICAL TREATMENT device with the + and - buttons
until they match the manual results, then select OK to
save.
If the results of the manual test fall outside the 6.2 - 7.8 range,
you will receive the following notification.
If the difference between the results of the manual test and
the values shown electrically by the pH valve is greater than
0.3, you will receive the following notification.
pH buffer 7.00 #12065
SUGGESTION:
To finely calibrate use the 7.00 pH testbuffer.
User guide for the ASIN Aqua device.
Choose the function of your CHEMICAL TREATMENT device:
1. Free chlorine probe CLF
2. Redox electrode probe RX
3. Dosage based on time ml/m3 per hour or per day
In the main menu select SETTINGS, then the TYPE OF PROBE
to enter the next screen.
If you have a free chlorine probe:
Your CHEMICAL TREATMENT device is set up and connected
to the spa water and the chemicals.
Adjust the chlorine level to 0.0 mg/l.
Adjust the pH value to 7.0.
Manually adjust the chlorine level of your spa to between 0.5
and 1.2 mg/l via the manual dispenser of the ASIN Aqua or di-
rectly via the manual dispenser of your chlorine disinfectant.
Wait 24 hours for stabilization.
OPTIONAL ACCESSORIES  CHEMICAL TREATMENT
87
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wellis W2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wellis W2000 in the language / languages: English as an attachment in your email.

The manual is 11.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wellis W2000

Wellis W2000 User Manual - German - 124 pages

Wellis W2000 User Manual - Dutch - 113 pages

Wellis W2000 User Manual - French - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info