813765
43
Zoom out
Zoom in
Previous page
1/52
Next page
Montage- und Betriebsanleitung
WWP S 6 IDT-2 - WWP S 11 IDT-2
3 Stromlaufpläne Hydraulikmodul
452236.66.07 · 01/2016 · Rei XIII
R1* Außenfühler External sensor Sonde extérieure
R2 Rücklauffühler Heizkreis Return sensor for heating circuit Sonde de retour circuit de chauffage
R2.1* Rücklauffühler Heizkreis im Doppeldifferenzdrucklo-
sen-Verteiler
Return sensor for heating circuit in dual differential
pressureless manifold
Sonde de retour circuit de chauffage dans le
distributeur double sans pression différentielle
R3 Warmwasserfühler Hot water sensor Sonde sur circuit d’eau chaude sanitaire
R5* Fühler 2. Heizkreis Sensor for heating circuit 2 Sonde pour 2e circuit de chauffage
R6 Vorlauffühler Primärkreis Flow sensor, primary circuit Sonde du circuit de départ circuit primaire
R7 Codierwiderstand Coding resistor Résistance de codage
R9 Vorlauffühler Heizkreis Flow sensor for heating circuit Sonde départ circuit de chauffage
R13 Fühler regenerativ, Raumfühler, Fühler 3. Heizkreis Renewable sensor, room sensor, sensor for
heating circuit 3
Sonde mode régénératif, sonde d'ambiance, sonde
3ème circuit de chauffage
R24 Rücklauffühler Primärkreis Return sensor, primary circuit Sonde retour circuit primaire
T1 Sicherheitstransformator 230 / 24 V AC - Regelung Safety transformer 230 / 24 V AC - Regulation Transformateur de sécurité 230 / 24 V AC - Régula-
tio
X1 Klemmleiste Einspeisung Last Terminal strip infeed load Alimentation bornier charge
X1.1 Stecker Lastspannung Plug supply voltage Connecteur tension de puissance
X2 Klemmleiste Spannung = 230 V AC Schaltkasten Terminal strip voltage = 230 V AC Tension bornier = 230 V AC
X3 Klemmleiste Kleinspannung < 25 V AC
Schaltkasten
Terminal strip extra-low voltage
< 25 V AC Switch box
Faible tension bornier
< 25 V AC Boîtier électrique
X7 Klemmleiste Leistungsanpassung E10.1 Terminal strip output adjustment E10.1 Bornier adaptation de puissance E10.1
X12 Stecker Steuerspannung 230 V Plug control voltage 230 V Connecteur tension de commande 230 V
X13 Stecker Kleinspannung <25 V Plug extra-low voltage <25 V Connecteur faible tension < 25 V
Y13 3-Wege-Umschaltventil Three-way reversing valve Vanne d'inversion 3 voies
* Bauteile sind bauseits anzuschließen / beizustellen Components must be connected / supplied by the
customer.
Les pièces sont à raccorder / à fournir par le client
[] Flexible Beschaltung - siehe Vorkonfiguration (Ände-
rung nur durch Kundendienst)
Flexible circuitry - see pre-configuration (changes by
after-sales service)
Commande flexible - voir pré-configuration (modifica-
tion uniquement par le SAV)
____ werkseitig verdrahtet Wired ready for use câblé en usine
------ bauseits nach Bedarf anzuschliessen to be connected on site if required à raccorder par le client si besoin
ACHTUNGACHTUNG
An den Steckklemmen N1-J1 bis
J11, -J19,
-J20, -J23 bis -J26 und der
Klemmleiste X3 liegt Kleinspannung
an. Auf keinen Fall darf hier eine
höhere Spannung angelegt werden.
ATTENTION
Extra-low voltage is supplied to
plug-in terminals N1-J1 to J11, -J19,
-J20, -J23 to -J26 and the terminal
strip X3. Higher voltage must not be
supplied here under any
circumstances.
ATTENTION !
Une faible tension est appliquée aux
bornes enfichables N1-J1 à J11, -
J19, -J20, -J23 à -J26 des bornier
X3. Ne jamais appliquer une tension
plus élevée.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Weishaupt WWP S 11 IDT-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Weishaupt WWP S 11 IDT-2 in the language / languages: German as an attachment in your email.

The manual is 2.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Weishaupt WWP S 11 IDT-2

Weishaupt WWP S 11 IDT-2 User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info