579168
22
Zoom out
Zoom in
Previous page
1/36
Next page
22
SMOKER BURNER IGNITION & USAGE
USING THE SEAR STATION
Your gas grill includes a sear burner for searing meats such as steak, poultry cuts, fish,
and chops.
Searing is a direct grilling technique, which browns the surface of the food at a
high temperature. By searing or browning both sides of the meat you will create a
more desirable flavour by caramelizing the food surface. Searing will also enhance
appearance of the meat with sear marks from the cooking grates. This along with the
contrast of textures and flavours can make food more interesting to the palate.
The Sear Station
burner has an ON or OFF control setting that works with the two
adjacent main burners. With the sear and adjacent burners you can effectively sear
meats while using other cooking areas for grilling with moderate heat.
Before searing you should turn all of the main burners on HI for 15 minutes to preheat
the grill. Note: Always grill with the lid closed to allow for maximum heat and to avoid flare-
ups.
Once the grill is preheated, turn the outer burners off or down to low. Leave the centre
two burners on HI and ignite the Sear Station
burner.
Place the meat directly over the Sear Station
. You will sear each side anywhere from
1 to 4 minutes, depending on the type of meat and thickness. You may turn the food a
quarter turn to make crossing sear marks (1) before you sear the other side in the same
manner.
Once you have finished searing, you can finish grilling by moving the meat to a more
moderate heat over the outside burners to achieve the desired doneness.
As you gain experience in using your Sear Station
, we encourage you to experiment
with different searing times to find results that work best for your taste.
SEAR STATION
BURNER MANUAL IGNITION
m DANGER
Failure to open the lid while igniting the grill’s burners, or not
waiting five minutes to allow the gas to clear if the grill does
not light, may result in an explosive flare-up, which can cause
serious bodily injury or death.
The Sear Station
burner has an ON or OFF control setting. To ignite the Sear Station
burner you must first ignite the two adjacent main burners.
Adjacent Main Burner Snap Ignition
NOTE: Each main burner control knob snap igniter creates a spark from the igniter electrode
to the burner lighting tube. You generate the energy for the spark by pushing in the control
knob and turning to START/HI. This will ignite each individual burner.
A) Open the lid (1).
B) Verify each adjacent Sear Station
main burner is lit by visual inspection of a
flame (2).
C) Put match in the match holder and strike match.
m WARNING: Do not lean over open grill.
D) Insert match holder and lit match down through cooking grates and Flavorizer
bars to ignite the Sear Station
burner (3).
E) Push the Sear Station
control knob in and turn to the ON position (4).
m WARNING: If the burner does not light, turn the burner control
knob to OFF and wait five minutes to let the gas clear before
you try again.
Note: Refer to “MAINTENANCE” for burner removal and
cleaning procedure.
TO EXTINGUISH
Depress and turn each burner control knob clockwise to OFF position. Turn gas supply
off at the source.
1
4
2
1
3
6 BURNER
SEAR METHOD
Food is placed in the area of intense heat between the lit burners.
The grills illustrated in this
Owner’s Guide may vary slightly
from the model purchased.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Weber Summit E-670 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Weber Summit E-670 in the language / languages: English as an attachment in your email.

The manual is 5,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Weber Summit E-670

Weber Summit E-670 User Manual - German - 36 pages

Weber Summit E-670 Installation Guide - German, Dutch - 4 pages

Weber Summit E-670 User Manual - Dutch - 36 pages

Weber Summit E-670 User Manual - French - 36 pages

Weber Summit E-670 Installation Guide - French, Italian, Portuguese, Spanish - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info