579168
21
Zoom out
Zoom in
Previous page
1/36
Next page
WWW.WEBER.COM
21
SMOKER BURNER IGNITION & USAGE
SEAR STATION
BURNER IGNITION
m DANGER
Failure to open the lid while igniting the grill’s burners, or not
waiting five minutes to allow the gas to clear if the grill does
not light, may result in an explosive flare-up, which can cause
serious bodily injury or death.
The Sear Station
burner has an ON or OFF control setting. To ignite the Sear Station
burner you must first ignite the two adjacent main burners.
Adjacent Main Burner Snap Ignition
NOTE: Each main burner control knob snap igniter creates a spark from the igniter electrode
to the burner lighting tube. You generate the energy for the spark by pushing in the control
knob and turning to START/HI. This will ignite each individual burner.
m WARNING: Always check hose before using grill for nicks,
cracking, abrasions or cuts. If the hose is found to be damaged
in any way, do not use the grill. Replace using only Weber
authorised replacement hose. Contact the Customer Service
Representative in your area using the contact information on
our web site.
Log onto www.weber.com.
A) Open the lid (1).
B) Make sure all burner control knobs are turned off (2). (Push control knob in and
turn clockwise to ensure that it is in the OFF position.)
C) Turn on the cylinder valve using one of the appropriate options based on your
cylinder and regulator type (3).
m WARNING: Do not lean over the open grill.
D) Ignite each adjacent Sear Station
main burner (4). Push the control knob in and
turn to START/HI until you hear the igniter snap - continue to hold control knob in
for two seconds. This action will spark the igniter, the burner lighting tube and then
the main burner.
E) Check that the burner is lit by looking through the cooking grates (5). You should
see a flame. If burner does not light on first try, push control knob in and turn to
OFF. Repeat lighting procedure a second time.
Sear Station
Burner Lighting: Ignition by an adjacent ignited main burner
F) Turn Sear Station
burner control knob to the ON position (6).
G) Verify burner ignition by visual inspection of a flame (7).
m WARNING: If ignition does not occur within five seconds, turn
burner control OFF, wait five minutes, and repeat steps F &
G, or refer to “SEAR STATION
BURNER MANUAL IGNITION”
instructions.
m WARNING: If the burner still does not light, turn the burner
control knob to OFF and wait five minutes to let the gas clear
before you try again or try to light with a match.
Note: Refer to “MAINTENANCE” for burner removal and
cleaning procedure.
TO EXTINGUISH
Push in and turn each burner control knob clockwise to OFF position. Turn gas supply
off at the source.
6
75
1
4
2
3
2 6
OFF ON
The grills illustrated in this
Owner’s Guide may vary slightly
from the model purchased.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Weber Summit E-670 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Weber Summit E-670 in the language / languages: English as an attachment in your email.

The manual is 5,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Weber Summit E-670

Weber Summit E-670 User Manual - German - 36 pages

Weber Summit E-670 Installation Guide - German, Dutch - 4 pages

Weber Summit E-670 User Manual - Dutch - 36 pages

Weber Summit E-670 User Manual - French - 36 pages

Weber Summit E-670 Installation Guide - French, Italian, Portuguese, Spanish - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info