The excess flow safety device, which is part of the
barbecue to cylinder connection, may have activated.
Turn gas supply on.
To reset the excess flow safety device turn all burner
control knobs and the cylinder valve off. Disconnect the
regulator from the cylinder. Turn burner control knobs to
START/HI. Wait at least one minute. Turn burner control
knobs to OFF. Reconnect the regulator to the cylinder.
Turn cylinder valve on slowly. Refer to “SIDE BURNER
IGNITION”.
Flame is low in HI position.Is the fuel hose bent or kinked?Straighten hose.
Push button ignition does not work.Does burner light with a match?If match lights burner, check igniter. Refer to “SIDE
BURNER MAINTENANCE”.
If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our
web site. Log onto www.weber.com
®
.
SIDE bURNER TRoUbLESHooTING
GRILL oUT™ HANDLE LIGHT TRoUbLESHooTING
PRobLEmcHEcKSoLUTIoN
Weber Grill Out™ Handle Light does not light.Are the batteries old?Replace batteries.
Are the batteries installed correctly?Refer to assembly illustration.
Is the lid in the up position with the power button ON?Light will activate when lid is open.
Is the Weber
®
Grill Out™ Handle Light activated? Press the power button.
Is the Weber
®
Grill Out™ Handle Light positioned
correctly on the handle?
Adjustposition.Refertoassemblyillustration.
If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Weber summit e 420 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Weber summit e 420 in the language / languages: English as an attachment in your email.
The manual is 13,52 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
