802472
12
Zoom out
Zoom in
Previous page
1/19
Next page
4 | Operating instructions
12 / 19 9026381C Dual Top ST 6 _ 8 - OI
10. Press OK. Selected day and hour appear on display. Matrix
with programmable hours and interior temperatures T1 and
T2 appears. Field of actual time and temperature blinks.
11. Press or to adjust desired temperature for selected
day and hour: OFF, T1 or T2.
12. Press OK.
13. Repeat step 11 and 12 until all 24 hours are programmed.
(The hour period is shown at the bottom of the display.)
14. Three seconds after you see “Programming successful” on
the display you can select another day as described in step
6, and continue to program remaining days. You can also
copy programmed values from one day to another. See
Daycopying, step 6.
When you have programmed all days, press BACK to return to
main menu.
Day copying
Instead of programming each day individually, you can copy
programmed values from one day to another.
After copying you can keep the identical values or make adjust-
ments (see Day setting, step 6).
If you copy days after setting temperatures T1 and T2, or pro-
gramming and setting a day, then start at step 6.
Make sure the device is switched on.
1. Press MENU.
2. Press and to select “ Programming Timer”.
3. Press OK.
4. Press and to select “ Timer Program 1” or “
Timer Program 2” (values T1 and T2 depend on program
settings).
5. Press OK.
6. Press and to select “Set Monday”, “Set Tuesday“,
Set Wednesday“ etc...
7. Press OK.
8. Press and to select “Copy Tuesday“, “Copy Wed-
nesday“ etc…
9. Press OK.
10. The display shows: “Copy of 24 h program successful”.
11. After 3 seconds, select another day as described in step 6
and continue to program remaining days.
12. When you have finished programming all days, then press
BACK to return to main menu.
4.5.2 Heating by timer
This paragraph describes how to select a program to heat the
interior and to provide hot water.
You can choose from 2 programs that define 7 days, 24 hours
interior and water heating.
To change the programs see chapter4.5.1, "Program setting"
on page 11 .
If you want the electric heater to provide hot air or hot water,
make sure you connect the external power supply (230 V AC): “
230 V” (10) on display.
Make sure the device is switched on.
1. Press MENU.
2. Press and to select “ Heating by Timer”.
3. Press OK.
4. Press and to select “ Timer Program 1” or “
Timer Program 2” (values T1 and T2 depend on program
settings).
5. Press OK.
6. Press and to select “ Heating Cabin” or “
Heating Cabin + Hot Water”.
7. Press OK.
8. Press and to select the desired heat source:
Dual Top ST 8
“Diesel powered”
“1,000 W ~ 230 V“ *
“2,000 W ~ 230 V“ *
* Options “...W ~ 230 V” shown only when external 230 V
power supply is connected.
9. Press OK. The display shows “Selection completed”.
NOTE
When the heater is already “ON”, the text “Selection
completed, press OK to change operation mode” is
displayed.
uPress OK.
After 3 seconds the power indicator (6) lights up in green and
the display changes to:
230 V and … W: Only Dual Top ST 8
Heater ON
Water ” (if “Hot Water” is selected)
Cabin
diesel“, “ 1000 W“, “ 2000 W“ (depending
on heater type and selected heat source).
Day
Time
Matrix with programmed hours and interior temperat-
ures. The actual time and temperature blink.
NOTE
Press and to view program settings of another
day.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Webasto Dual Top ST 8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Webasto Dual Top ST 8 in the language / languages: English as an attachment in your email.

The manual is 6.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Webasto Dual Top ST 8

Webasto Dual Top ST 8 User Manual - German - 21 pages

Webasto Dual Top ST 8 User Manual - Dutch - 21 pages

Webasto Dual Top ST 8 User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info