Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: Info@Aktobis.de
Functional description of the control panel:
1. ON/OFF switch (ON/OFF) A. Display panel (temperature etc.)
2. Button for setting the operating mode B. Signal light when automatic mode is activated
3. Button for increasing the room temperature C. Signal light when cooling mode is activated
4. Button for lowering the room temperature D. Signal light when fan operation is activated
5. Setting the air circulation strength E. Signal light for high air circulation rate
6. Timer F. Signal light for medium air circulation strength
7. Quiet night mode G. Low air circulation signal light
8. TiO2/ION button (inactive on this unit type) H. Signal light when timer is activated
I. Signal light when night mode is activated
J. Signal light for TiO2/ION operation (inactive)
K. Signal light - condensation water tank is full
Instructions for use:
1. Commissioning
1.1. Insert the mains plug properly into the socket.
1.2. Check that the exhaust hose for the hot air is properly installed (see page 5 of the instructions for use).
1.3. Press the ON/OFF switch. The cooling unit switches on and the default setting Cooling with low air
circulation starts to work. The default target temperature is 24°C. At the same time, the display panel
and signal lights turn on. (Note: The display field for the room temperature can show values from 0°C
to 50°C.) )