694507
26
Zoom out
Zoom in
Previous page
1/64
Next page
26
GB
same way, only one hole higher (see  g. 10).
7. Take the soapstone panels out of the packaging (use the correct lifting procedures and take care not to injure your back).
8. Place the lower side stones into position. A pin on the bottom plate of the wood-burning stove ensures the stone
remains in place (see  g. 11).
9. Screw the headless Allen bolt into the connection. This bolt will be the connection pin for the second stone (see  g. 12).
10. Place the second stone in position and attach it with another headless Allen bolt (see  g. 13).
11. The upper mounting clamp can be adjusted by loosening the 2 bolts in the slotted holes (see  g. 13a).
12. Replace the steel front plate using the 4 magnets. A pin/hole connection ensures the plate does not sag (see  g. 14).
13. Gently place the 2 upper stones into position on top of the wood-burning stove (see  g. 14).
Assembling the handle (all models):
On the inside of the door you’ll  nd a marking where to drill (use 7 mm drill) the upper hole. The lower hole needs to be drilled
25 mm below that (center to center) (see  g. 18). The handle can be bolted into place using the M6 bolts.
Repairs
Glass replacement
Open the door,
Remove the 4 screws on the inside of the door,
Remove the 2 glass holders,
Carefully remove the glass from the door,
Ensure the seal is undamaged and has not come loose. If this
is not the case, reattach the seal with heat-resistant sealant, or
replace the seal completely,
Place the new glass in position; take the sharp edges of the
glass into account
Reassemble the various parts.
Inner combustion chamber replacement
Please adhere to the order of removal when removing the panels
from the wood-burning stove;
Remove the front grille (H)
Remove the bottom plate (A)
Remove the front left plate (B) and front right plate (C),
Tilt the large ba e plate (G) slightly and remove the left rear
plate (D),
Remove the large ba e plate (G),
Remove the rear right plate (E),
Remove the rear wall (F).
You can leave the small vermiculite ba e plate (I) in place.
Cleaning  ue gas bypass channels
All images can be found on page 58.
Remove the upper stones from the wood-burning stove (use
the correct lifting procedures and take care not to injure your back) and the lower front plate (this is  xed in place with
magnets)
On the left and right of the wood-burning stove you will see a number of butter y bolts, unscrew these and remove the
valve (see  g. 15).
Brush the deposits downwards into the collectors using a brush.
You can now remove the collectors in the space under the wood-burning stove by unscrewing them (see  g. 16 and 17).
Reassemble all parts and screw everything tight so  ue gases cannot escape.
Place the upper stones back into position on the wood-burning stove.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wanders Pecan Eco at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wanders Pecan Eco in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info