694507

Wanders Pecan Eco Manual

25
Zoom out
Zoom in
Previous page
1/64
Next page
25
GB
Pecan Eco S Pecan Eco M | Pecan Eco L
Connecting the stove
The Pecan Eco is a heavy wood stove. Depending on the version, the Pecan Eco weighs at least 300 kilos, including the
2-meter long smoke-gas discharge. Make sure the wall or oor that you are installing the stove on can easily carry this weight.
Before installing the stove, follow the directions in the previous chapter ‘Preparation’. Protect your back and the oor during
installation.
Setting up the Pecan Eco:
All images can be found on page 55.
1. Check the packaging, is there any visible damage? If so, report it.
2. Pull the wood-burning stove out of the box (use the correct lifting procedures and take care not to injure your back).
3. Carefully put the replace in the right place, directly under the ue.
4. Ensure the replace is level.
5. The underpressure in the ue must be 10 to 12 Pa (0.1 to 0.12 mBar).
6. Take any re-protective measures that may be necessary (see page 23 “Fire Safety”).
7. Now install the ue. Use a suitable ue with a diameter of 150 mm and a thickness of at least 2 mm. Remember, a ue can
expand by up to 1 cm per meter; so ensure the ue is not tted too tight.
8. The steel front plate above the door can be removed for convenience. This is held in place with 4 magnets. 2 pin/hole
connections ensure the plate does not sag (see g. 01).
Mounting the soapstone on the Pecan Eco S and Pecan Eco M:
All images can be found on page 55.
1. Check the packaging, is there any visible damage? If so, report it.
2. Take the soapstone panels out of the box (use the correct lifting procedures and take care not to injure your back).
3. Place the lower side stones into position. A pin on the bottom plate of the wood-burning stove ensures the stone
remains in place (see g. 02).
4. Screw the headless Allen bolt into the connection. This bolt will be the connection pin for the second stone (see g. 03).
5. Place the second stone into position and attach it, also using a headless Allen bolt. Ensure the Allen bolt is screwed in far
enough to ensure it does not touch the stones above (see g. 04).
6. The upper mounting clamp can be adjusted by loosening the 2 bolts in the slotted holes (see g. 04a).
7. Gently place the 2 upper stones into position on top of the wood-burning stove (see g 05).
Assembly of the Pecan Eco L:
All images can be found on page 55 and 56.
The Pecan Eco L is based on the M version of the wood-burning stove. A height extender is put in place as described below.
First follow the steps for setting up the Pecan Eco M as described above.
1. Check the packaging, is there any visible damage? If so, report it.
2. Remove the height extender set from the packaging. This consists of a rack and a front plate (see g. 06).
3. Remove the steel front plate above the door. This is held in place with magnets (see g. 07).
4. Remove the upper mounting clamps for the soapstone from the wood-burning stove and attach them to the top of the
height extender set (see g. 08).
5. Put the height extender in place on the wood-burning stove. It does not have to be screwed in place (see g. 09).
6. Remove the middle mounting clamps used for the soapstone from the wood-burning stove and re-attach them in the
292,75
96,2
Ø 80 mm
442,75
96,2
Ø 80 mm
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wanders Pecan Eco at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wanders Pecan Eco in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info