Manual Wanders Pecan Eco (page 19 of 64) (English, German, Dutch, French)

694507

Zoom out

Zoom in

1/64

Fuel

Wood Drying time

Fir, Poplar 1 year

Lime, Willow, Spruce, Birch, Ash, Alder 1,5 years

Fruit trees, Beech 2 years

Pecan Eco 2,5 years

The Pecan Eco only burns on wood. Do not put more than 1-3 kg of fuel in the stove at the time. Always use clean and cut

logs, which have suciently dried. Please see the above list for drying times. Wet wood does not burn well and gives heavy

smoke emission. It may blacken the glass pane of your stove with soot and build up smut in the ue pipe. This may increase

the risk of chimney re.

Fresh, moist wood contains about 50% moisture. Cleaved wood still contains 20% moisture after drying it for a year and

moisture percentage will be decreased to 12 to 15% after drying it for two years. Dry wood gives nice ames and little or no

smoke, and the re will crackle when burning. Wet wood makes a hissing sound, gives much smoke and only small ames

which will considerably dampen the pleasure of burning your stove and the heat output.

Wood species and storage

You can use all kinds of woods as fuel as long as it is clean, split and dry. Hardwood like Pecan Eco, beech and birch burn

slowly, give o much heat and form charcoal easily. Softer woods like spruce, r and poplar give more ames but less heat

and less charcoal.

The best place to store timber is in a windy spot but sheltered from the rain. This is how the logs can dry in a natural way. Pile

the logs on an old pallet or a frame to let the wood dry from underneath and to prevent the lower logs from being in contact

with water.

Do not put any paran-containing logs in your stove. When the door is closed, the high heat will melt the

paran from the logs too quickly. The polluted ue gasses which consequently develop will deposit on

and burn in the glass of your stove and cannot be removed later.

Do not use any wood that is painted, impregnated, glued together or processed in any other way. The ue

gases are very harmful to the environment and may aect your stove. It is also prohibited to burn plastics

and other waste matter due to poisonous smoke development.

Lighting the stove

Lighting your stove early in autumn or late in winter

When the external and internal temperatures do not dier much, a proper chimney draught is a challenge.

Early in autumn or late in winter you can help chimney draught get started by burning some wood while

keeping all air inlets maximally open. An abundant air supply speeds up quick heating which in turn

increases the draught in the chimney. Lighting up the stove with only a little wood prevents smoke from

streaming into the room.

The stove will become very hot when you light it and will need at least two hours to cool o. Don’t touch

the stove without protection during ring and for two hours after. Handle the stove always with a glove to

avoid getting serious burns.

Never leave the optional wooden part of the handle in the steel ring while using the replace. The handle

must only be used to open and close the door; once used, put it back in a safe place. The wood will discolour

over time - this can not be avoided.

First read the chapter on “Lighting for the rst time” on page 17 and 18 when using the replace for the rst time.

Before lighting the replace, you may want to wipe any dirt from the windows with some paper towel. Open the combustion

air supply (A). The ue gas valve (B) must also be open. Fully slide the air valve to the open position before lighting the

wood-burning stove. Then open the door and stack a few blocks of wood in the replace with a few small pieces of wood

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Wanders Pecan Eco in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Wanders Pecan Eco Manual

Product: