Manual Wanders Norma Free (page 24 of 65) (English, German, Dutch, French)

571832

Zoom out

Zoom in

1/65

Placing of the concentric channel

system

The concentric channel system consists of three parts:

the channels itself, the transit through the roof or through

a wall and the outﬂow.

Instructions for placing the outﬂow

The outﬂow of the pipe system can be placed on top of

the roof or against the side wall of the house.

Roof outlet

When placing the outﬂow on top of the roof, make sure

that there is a distance of at least 50 cm between the

outﬂow and the edges of the roof, with the exception of

a possible existing ridge. You must also take the place

of the outﬂow into account in relation to the existing

ventilation openings, movable windows and combustion

air supply provisions. Please consult the national and

local requirements.

Wall outlet

When placing the outﬂow into the side wall, make sure

that there is distance of at least 50 cm between the

outﬂow and the corners of the building, eaves, gutters,

balconies and etceteras. You need not have this distance

when the outﬂow runs through to at least the front of the

overhanging part.

You must also take the place of the outﬂow into account

in relation to the existing ventilation openings, movable

windows and combustion air supply provisions. Please

consult the national and local requirements.

Placing possibilities of the pipe system

The total length of the pipe system must never be more

than 10 metres excluding the passage through the wall

and the outﬂow. A 90° square angle counts as a length of

2 metres. A 45° turn counts as a length of 1 metre.

For the combined ﬂue tube and combustion air supply

you must apply one of the following placing possibilities

of the WANDERS concentric pipe systems: with wall

duct, with roof duct or with roof duct with bend.

Placing possibilities of the pipe system

Make your choice from the installation possibilities

shown above. Place the ﬁrst meter of the concentric

pipe on the counterpart on the appliance. You will know

that you placed it properly if you can see the blue rubber

seal ring when looking from above. Keep a distance of at

least 5 cm between the inner side of the concentric pipe

and the wall or the ceiling.

Pay special attention to proper installing when, due to

circumstances, a part of the double-walled pipe system

must be built in.

Exterior wall duct

• Always allow one metre vertical before passing

through the outer wall.

• Determine the location of the gas unit and the exterior

wall duct.

• Make an opening of Ø 155 mm for the wall duct.

• Connect the wall duct with a curve to the mouth of the

appliance. Push them ﬁrmly together and place the

clip bindings. The blue rubber ring ensures sufﬁcient

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Wanders Norma Free in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Wanders Norma Free Manual

Product: