Manual Wamsler W3-50 (page 35 of 112) (English, German, French, Italian)

813244

Zoom out

Zoom in

1/112

1.7 Chimney attachment

The connection for attaching to the chimney must be able to withstand at least 400°C.

PLEASE NOTE:

Before connecting the stove the local authority responsible for approving heating

systems must be consulted!

Connection pieces must be firmly connected to the stove and to each other and must

not leak. They must not project into the open diameter of the chimney. The connection

piece between the stove and the chimney must have the same diameter as the pipe

socket on the stove. Horizontal connection pieces of over 0.5 m must rise towards the

chimney at an angle of 10 degrees. Any pipes which are not heat insulated or vertical

must not be longer than 1 metre.

The requirements of the Fire Regulations (FeuVO) apply, as well

as local building regulations such as for the chimney standards

DIN 4705, DIN EN 13384, DIN 18160 and DIN EN 15287.

Connection pieces must be tested to DIN EN 1856-2.

Measurement X (distance from flammable construction and other

materials) must be as defined by the manufacturer of the

connection piece.

PLEASE NOTE:

Fitting to a chimney with a functional height of less than 4 m,

or if several stoves are being fitted, less than 5 m, is not

permitted. (See: Data for chimney calculations / Chapter 4.) A

maximum of two other fires can be connected to the chimney to be connected to

the stove.

For safety reasons it is not permitted to use a steam extractor hood to remove air

when the stove is producing heat.

1.8 Choice of flue gas connection placement

The flue outlet is attached to the back of the stove as standard. If a connection to the

side or the top is required, then the unused connection must be closed off.

1.8.1 Top connection (Fig. 1)

 Remove the rear flue adapter (1) by loosening the screws.

 Remove cooking plate (2) and fire bricks (3)

 Remove steel plate (4) in the exhaust

 Close flue gas connection at the back from outside using the blank cover supplied

(5) and screw this tight.

 Bolt tight the cover (6) at the inside with the outside cover (7)

 Swing back cover (8) upwards and close

 Remove flue gas cover (3) and the large hob plate (2)

 Connect the optional flue connection set (9) from below to the opening and screw

tight at the cooking plate.

 Replace the steel plate (4), the fire bricks (3) and the cooking plate (2)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Wamsler W3-50 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2.85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Wamsler W3-50 Manual

Product: