Manual Wamsler W3-50 (page 32 of 112) (English, German, French, Italian)

813244

Zoom out

Zoom in

1/112

1.5 Air supply

A constant supply of oxygen or air is required for the combustion process. Normally the

air available in the room where the stove is installed will be sufficient.

If the windows and doors are well insulated, if mechanical air extraction mechanisms

are present ( e.g. in a kitchen or bathroom) or if there are other sources of fire (including

gas boilers) in the home, then the supply of available air can be significantly impacted. If

this is the case, the option exists to draw in air for burning directly from outdoors or from

another, well-ventilated room (e.g. a cellar).

The stoves provide a built-in air supply opening in the base, Ø 80 mm.

For the air supply you must use only smooth pipes with a minimum diameter of 80 mm.

A shutoff valve must be placed in the air supply close to the stove, which must be

installed professionally, at the bends there must be inspection openings for the local

authority responsible for approving heating systems and it must be professionally

sealed against condensation. The pipe must not be longer than 4 m and must not

have more than 3 bends. If the pipe exits out-of-doors, then it must have appropriate

wind protection and be covered by a mesh.

NOTE: In the room where the stove is installed or in the neighbouring rooms there

must not be any air extractors or similar equipment. These could cause

considerable operating problems and even represent a risk. Consult the

local authority responsible for approving heating systems.

NOTE: The room where the stove is to be installed must not have equipment such

as extractor hoods, ventilation systems etc. which could mean that that

room or neighbouring rooms have reduced air pressure.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Wamsler W3-50 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2.85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Wamsler W3-50 Manual

Product: