Manual Wamsler W1-90 (page 36 of 104) (English, German, French, Italian)

813266

Zoom out

Zoom in

1/104

angle of 10 degrees. Any pipes which are not heat insulated or verti-

cal must not be longer than 1 metre.

The requirements of the Fire Regulations (FeuVO) apply, as well as

local building regulations such as for the chimney standards DIN

4705, EN 13384, DIN 18160 and EN 15287.

Connection pieces must be tested to EN 1856-2. Measurement X

(distance from flammable construction and other materials) must be

as defined by the manufacturer of the connection piece.

PLEASE NOTE:

Fitting to a chimney with a functional height of less than 4 m, or

if several stoves are being fitted, less than 5 m, is not permitted.

(See: Data for chimney calculations / Chapter 4.) A maximum of

two other fires can be connected to the chimney to be connected to the stove.

For safety reasons it is not permitted to use a steam extractor hood to remove air

when the stove is producing heat.

1.9 Choice of flue gas connection placement

The flue outlet is attached to the back of the stove as standard. If a connection to the side

or the top is required, then the unused connection must be closed off.

1.9.1 Top connection (Fig. 1)

• Remove the rear flue outlet (1) by loosening the screws.

• Close off flue gas connection behind stove from outside using the blank cover supplied

(12) and screw this tight

• Rear masking cover (8) should be swung upwards and closed

• Remove flue gas cover (3) and the large hob plate (2)

• Connect the flue connector (1) from below to the opening of the flue gas cover (3) of

the large hob plate (2) and screw tight

• Replace the hob plate (2)

1.9.2 Side connection (Fig. 1)

• Remove the rear flue outlet (1) by loosening the screws.

• Remove the side cover plate (10) by loosening the screws

• Cut through the connectors in the 3x insulation panels (11) using side-cutting pliers

and remove

• Loosen the screws in the side blank cover (12) and remove cover

• Fasten flue outlet (1) to the side panel and screw tight

• Close off flue gas connection behind stove from outside using the blank cover supplied

(12) and screw this tight

• Rear masking cover (8) should be swung upwards and closed

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Wamsler W1-90 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Wamsler W1-90 Manual

Product: